Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Washer

Whirlpool Duet and WFW Front-Load Washer Code F4 E4: Power Reset Guidance for Duet and WFW

The Whirlpool Duet and WFW front-load family, which includes the WFW5620HW, WFW9150WW and WFW90HEFW, can display F4 E4. The brand names no cause for it and offers a power reset as the single owner step. That…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F4 E4
Appliance
Washer
Brand
Whirlpool
Warranty
30-day workmanship

What F4 E4 means

The Whirlpool Duet and WFW front-load family, which includes the WFW5620HW, WFW9150WW and WFW90HEFW, can display F4 E4. The brand names no cause for it and offers a power reset as the single owner step. That makes it a code we investigate by testing rather than by assuming a part. Expect the display to show the characters while the cycle pauses or refuses to begin. Many of these washers are older and still in daily use in Houston homes, and we repair them.

Common causes of F4 E4

  • Control reading that a reset can clear
  • Loose connector or wiring on the washer
  • Unnamed circuit we isolate by testing
✓ One safe check you can try

1. Pull the plug and leave the washer disconnected for a full 5 minutes. 2. Plug it in again and run a quick cycle with a small load. 3. Look at the door seal and glass for trapped clothing. 4. Confirm both water valves are open. 5. If F4 E4 keeps coming back, call us for a test visit.

! Why to stop there
  • After a reset we still cannot say which circuit raised the code.
  • We watch the washer through a cycle to see where it stops.
  • If testing leads to a repair, you see the cost in writing first.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

LFWhirlpool Top-Load Washer Code LF: Tub Is Too Slow to Fill SudWhirlpool Washer Sud or Sd: Too Many Suds in the Tub LidWhirlpool Top-Load Washer Display Lid: Lid Opened During the Cycle uLWhirlpool Top-Load Washer Code uL: Unbalanced Load Needs Rearranging Lid Light FlashingWhirlpool Top-Load Washer Lid Light Flashing: Close the Lid or Wait for the Lock Test Wash Light On or FlashingWhirlpool Top-Load Washer Wash Light On or Flashing: Water Level Not Changing Lid Lock FlashingWhirlpool Top-Load Washer Lid Lock Light Flashing: Lock Fails to Engage Water Tap is ClosedWhirlpool Washer Symbol "Water Tap Is Closed": Water Is Not Arriving
F4 E4F4 E4 questions
Is F4 E4 the same as F4 E1?

Both come from the same family and both get only a power reset in the brand's guidance, but they are separate codes. We do not assume one fix covers both, and we check what each one is tied to.

What should I do first when F4 E4 appears?

Unplug the washer for 5 minutes, plug it back in and run a short cycle. If the code stays away, keep an eye on it. If it returns, schedule service so we can test.

Will a repair on an older WFW cost more than the washer is worth?

We tell you plainly. These are older models still in many homes and we repair them, but we give a written price first so you can decide whether it makes sense.

Book a visit

Still seeing F4 E4?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107