Error code · Washer

Whirlpool Front-Load Washer Code CL: Time to Run a Clean Cycle

Low risk · DIY check OK

Code: CL
Appliance: Washer
Brand: Whirlpool
Warranty: 30-day workmanship

What CL means

CL on a Whirlpool front-load washer, the Duet and WFW style such as the WFW5620HW, WFW9150WW or WFW90HEFW, in both current and older generations, is a reminder and not an error. The washer shows it after 30 cycles to tell you it is time to run the Clean Washer cycle. The code clears by itself once a clean cycle has been completed, or after three more cycles if you do not run one. Nothing is wrong with the washer when CL appears.

Common causes of CL

Thirty cycles reached since the last clean cycle
Clean Washer cycle never run on this machine
Odor or residue building up in the tub and seal area
Washer working normally and only reminding you

✓ One safe check you can try

1. Run the Clean Washer cycle with a washer cleaner made for front-load machines, following its label. 2. Leave the door slightly open afterward so the drum can dry. 3. Wipe the door seal and the dispenser area. 4. Let the code clear on its own once the cycle finishes. 5. If CL stays, note how many cycles have run since.

! Why to stop there

A reminder code needs no repair, but a clean cycle that cannot finish does
If the washer stalls, drains slowly or leaves a smell after cleaning, we test it
Anything we repair is quoted in writing first and covered for 30 days on workmanship

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Lid Light FlashingWhirlpool Top-Load Washer Lid Light Flashing: Close the Lid or Wait for the Lock Test Wash Light On or FlashingWhirlpool Top-Load Washer Wash Light On or Flashing: Water Level Not Changing Lid Lock FlashingWhirlpool Top-Load Washer Lid Lock Light Flashing: Lock Fails to Engage Water Tap is ClosedWhirlpool Washer Symbol "Water Tap Is Closed": Water Is Not Arriving Lo FLWhirlpool Front-Load Washer Code Lo FL: Not Detecting Enough Incoming Water What does the "SUD" or "SD" meanWhirlpool Washer Display SUD or SD: What It Means and How to Clear It LoCWhirlpool Front-Load Washer LoC or LC: Control Lock Is Switched On Multiple Lights FlashingWhirlpool Top-Load Washer with Several Lights Flashing: Out-of-Balance Load

CLCL questions

Is CL a problem with my washer?

No. It is a maintenance reminder that appears after 30 cycles. Running the Clean Washer cycle clears it, and it will also clear by itself after three more cycles.

Do I have to run the clean cycle?

It is recommended, because it helps keep odors and residue away from the tub, drain and hoses. If you skip it, CL goes away on its own after three cycles and returns after another 30.

What if my washer smells even after cleaning?

Then we look at the drain, the seal and the pump for trapped residue. We quote in writing before work, and older front-load washers get an honest opinion on whether repair makes sense.

Book a visit

Still unsure about CL?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107