Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Washer

Whirlpool Front-Load Washer Code F3 E5: Power Reset Is the Only Owner Step

F3 E5 appears on Whirlpool Duet and WFW front-load washers, current and older, including models like the WFW9150WW and WFW5620HW. The washer halts and shows the code, and the guidance is limited to cycling power at…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F3 E5
Appliance
Washer
Brand
Whirlpool
Warranty
30-day workmanship

What F3 E5 means

F3 E5 appears on Whirlpool Duet and WFW front-load washers, current and older, including models like the WFW9150WW and WFW5620HW. The washer halts and shows the code, and the guidance is limited to cycling power at the control. No part or cause is given, which means the display alone cannot say whether the trouble is a sensor, a wire or the control board itself. For that reason we describe it as a control-level code, and the reset is a test.

Common causes of F3 E5

  • A control stop that clears with a full reset
  • A circuit or connection that fails again after the reset
  • Unsteady power at the outlet
✓ One safe check you can try

1. Take the plug out of the outlet. 2. Count out 5 minutes before plugging it back in. 3. Close the door and start a short cycle. 4. If F3 E5 is on the display again, stop and book service.

! Why to stop there
  • A reset cannot reveal which circuit raised F3 E5.
  • If it returns, we trace it on site from the control outward.
  • We quote in writing first, and say plainly when an older Duet is not worth the repair.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

rLWhirlpool Front-Load Washer Code rL: Items Found During Clean Washer LdWhirlpool Top-Load Washer Code Ld: Water Is Slow to Leave the Tub Sd or 5dWhirlpool Top-Load Washer Code Sd or 5d: Suds Reduction Is Running LdLWhirlpool Top-Load Washer Code LdL: Lid Fails to Lock Sense and Wash FlashingWhirlpool Top-Load Washer Sense and Wash Lights Flashing: Unbalanced Spin LdUWhirlpool Top-Load Washer Code LdU: Lid Is Unable to Unlock Spin Light FlashingWhirlpool Top-Load Washer Spin Light Blinking: The Basket Is Off Balance LFWhirlpool Top-Load Washer Code LF: Tub Is Too Slow to Fill
F3 E5F3 E5 questions
Is F3 E5 different from F3 E3?

They are separate codes, but the owner instruction is the same: reset the control for 5 minutes. Neither code names a part, so we test the washer to find out.

What if it works after the reset?

Then it was likely a one-time stop. Keep an eye on it, and note when it happens if it returns, because that helps us find the cause.

Why can't a phone call settle it?

The code names no part, so we have to test the control and wiring in person. You get a written price before any work begins.

Book a visit

Still seeing F3 E5?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107