Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Washer

Whirlpool Washer Code F1E6: Voltage Outside the Normal Range or a Surge

F1E6 is about the electrical supply to the washer. On Whirlpool compact ventless laundry towers it means the power supply voltage is out of range. On the washer section of a stacked laundry tower or laundry…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F1E6
Appliance
Washer
Brand
Whirlpool
Warranty
30-day workmanship

What F1E6 means

F1E6 is about the electrical supply to the washer. On Whirlpool compact ventless laundry towers it means the power supply voltage is out of range. On the washer section of a stacked laundry tower or laundry center the potential cause is listed as a power surge. In both cases the washer stops and shows F1E6. The first thing to rule out is a one-time spike, which a 30-second power reset can clear on a stacked tower.

Common causes of F1E6

  • A power surge or brownout that upset the control
  • A loose plug, a tired outlet or a shared circuit that dips under load
  • Control circuitry that reads the supply incorrectly, which we test last
✓ One safe check you can try

1. Unplug the washer and wait 30 seconds. 2. Look at the plug and cord for heat marks or damage; if you see any, leave it unplugged. 3. Plug it directly into a wall outlet, not a power strip or extension cord. 4. Run a short cycle, and schedule service if F1E6 returns.

! Why to stop there
  • A reset cannot show whether the house supply or the washer's own circuitry is out of range.
  • We check the outlet and the way the washer reads its supply.
  • The price is given in writing before work.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

Rinse Light OnWhirlpool Top-Load Washer Rinse Light On: Spray Rinse in Progress rLWhirlpool Front-Load Washer Code rL: Items Found During Clean Washer LdWhirlpool Top-Load Washer Code Ld: Water Is Slow to Leave the Tub Sd or 5dWhirlpool Top-Load Washer Code Sd or 5d: Suds Reduction Is Running LdLWhirlpool Top-Load Washer Code LdL: Lid Fails to Lock Sense and Wash FlashingWhirlpool Top-Load Washer Sense and Wash Lights Flashing: Unbalanced Spin LdUWhirlpool Top-Load Washer Code LdU: Lid Is Unable to Unlock Spin Light FlashingWhirlpool Top-Load Washer Spin Light Blinking: The Basket Is Off Balance
F1E6F1E6 questions
Can a storm cause F1E6?

Yes. A surge or a brownout can upset the control and put F1E6 on the display. Unplugging the washer for 30 seconds is the first and safest step, and it often clears a one-time event.

Should I use a power strip?

No. Plug the washer straight into a wall outlet. Strips and extension cords can add resistance and make a voltage reading worse, and they are not meant for a washer's load.

What if my other appliances also act odd?

Then the supply may be the cause. Stop using them, and call us. We check the washer, and an electrician may be needed for the house wiring.

Book a visit

Still seeing F1E6?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107