Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Washer

Whirlpool Front-Load Washer Code FH: Water Is Not Reaching the Tub

FH on a Whirlpool front-load washer from the Duet and WFW family, current or older, means a water inlet problem: no water or not enough is arriving. The washer waits for the tub to fill, gives…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
FH
Appliance
Washer
Brand
Whirlpool
Warranty
30-day workmanship

What FH means

FH on a Whirlpool front-load washer from the Duet and WFW family, current or older, means a water inlet problem: no water or not enough is arriving. The washer waits for the tub to fill, gives up, and displays FH. It is a different code from Lo FL and F8 E1, which describe the fill amount; FH points at the supply side. Typical culprits are closed faucets, kinked hoses or clogged screens where the hoses meet the washer. Models like the WFW5620HW and WFW9150WW show it this way.

Common causes of FH

  • A faucet on the hot or cold side that is only partly open
  • Inlet hose kinked or crushed behind the washer
  • Screens at the hose connections clogged with sediment
  • Inlet valve or control circuit, once supply is confirmed
✓ One safe check you can try

1. Press Pause/Cancel twice to cancel the cycle, then unplug the washer. 2. Make sure both the hot and cold faucets are completely open. 3. Check that neither inlet hose is bent or flattened. 4. Shut the faucets and look at the screens where the hoses attach for debris, then reconnect and run a short cycle.

! Why to stop there
  • If water flows freely to the washer and FH still appears, the valve or the control becomes the question.
  • We measure the supply at the hoses, then test the valve circuit, instead of replacing parts on a guess.
  • You get the price in writing first, and the work we complete carries a 30-day workmanship warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

LdLWhirlpool Top-Load Washer Code LdL: Lid Fails to Lock Sense and Wash FlashingWhirlpool Top-Load Washer Sense and Wash Lights Flashing: Unbalanced Spin LdUWhirlpool Top-Load Washer Code LdU: Lid Is Unable to Unlock Spin Light FlashingWhirlpool Top-Load Washer Spin Light Blinking: The Basket Is Off Balance LFWhirlpool Top-Load Washer Code LF: Tub Is Too Slow to Fill SudWhirlpool Washer Sud or Sd: Too Many Suds in the Tub LidWhirlpool Top-Load Washer Display Lid: Lid Opened During the Cycle uLWhirlpool Top-Load Washer Code uL: Unbalanced Load Needs Rearranging
FHFH questions
Is FH the same as Lo FL?

No. FH reports that water is not coming in or is insufficient. Lo FL and F8 E1 report that the washer is not detecting the right amount of incoming water. We check the supply for both, but we read them separately.

Why would the screens clog?

Sediment, scale and rust flakes from household plumbing collect in the small screens at the hose ends. After a plumbing job or a water main flush they often catch more debris than usual.

Can low water pressure trigger FH?

Yes. A half-closed shutoff or weak house pressure can make the fill too slow for the control. If other faucets run strongly and only the washer struggles, the hoses, screens or inlet valve are suspect.

Book a visit

Still seeing FH?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107