Whirlpool Laundry Tower Washer Code F4E4: Main Heater Circuit in the Washer Section
F4E4 on the washer section of a Whirlpool laundry tower or stacked laundry center points to the main heater. This is the circuit that warms the wash water, and the control is reporting that it cannot…
- Code
- F4E4
- Appliance
- Washer
- Brand
- Whirlpool
- Warranty
- 30-day workmanship
What F4E4 means
F4E4 on the washer section of a Whirlpool laundry tower or stacked laundry center points to the main heater. This is the circuit that warms the wash water, and the control is reporting that it cannot count on it. The code appears on the display and the cycle may stop or run without heat. No model number is named for this code, and a power reset is the only owner step offered.
Common causes of F4E4
- Main heater circuit
- Wiring between the heater and control
- Control reading of the heater
1. Disconnect the tower from power for 5 minutes. 2. Restore power and confirm the hot water valve is open. 3. Look for kinked supply hoses behind the unit. 4. Run a short cycle. 5. If F4E4 returns, schedule service.
- After a reset we still do not know if the heater, wiring or control caused the code.
- We test the heating circuit on the washer section.
- Heater work is quoted in writing before it begins.
Other Washer codes
Is F4E4 a safety problem?
It is a heater circuit alert on the washer section. A reset is safe to try, but if the code returns, please stop using the washer and let us test the circuit.
How is F4E4 different from F4E2 and F4E3?
On a standard tower all three name the main heater, so the exact reading differs by code. We test the circuit rather than guess which variation applies.
Can I use the dryer while F4E4 shows on the washer?
The code concerns the washer section. Check the dryer separately, and tell us if both sections show problems so we can look for a shared cause.
Still seeing F4E4?
A technician diagnoses it on site and gives you the price in writing before any work starts.