Error code · Washer

Whirlpool Laundry Tower Washer Code F3E8: Temperature Sensor Alert Without a Named Part

Medium · inspection needed

Code: F3E8
Appliance: Washer
Brand: Whirlpool
Warranty: 30-day workmanship

What F3E8 means

On the washer section of a Whirlpool laundry tower or stacked laundry center, F3E8 refers to a temperature sensor. It is a plainer alert than F3E7, which names the wash temperature sensor specifically. The code appears on the display and the washer may stop or refuse to run a cycle. The only owner step offered is a power reset, and no model number is named for this code.

Common causes of F3E8

Temperature sensor circuit
Wiring between sensor and control
Control reading of the sensor

✓ One safe check you can try

1. Disconnect the laundry tower from power for 5 minutes to reset the control. 2. Restore power and confirm both water valves are fully open. 3. Check that the supply hoses are not kinked behind the tower. 4. Run a short cycle. 5. If F3E8 returns, schedule service so we can test the temperature circuits.

! Why to stop there

After a reset we still do not know which temperature circuit is reporting.
We test sensor and wiring on the washer section.
Because the code is generic, we explain what we found and its cost before you approve anything.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Lo FLWhirlpool Front-Load Washer Code Lo FL: Not Detecting Enough Incoming Water What does the "SUD" or "SD" meanWhirlpool Washer Display SUD or SD: What It Means and How to Clear It LoCWhirlpool Front-Load Washer LoC or LC: Control Lock Is Switched On Multiple Lights FlashingWhirlpool Top-Load Washer with Several Lights Flashing: Out-of-Balance Load No Water DetectedWhirlpool Front-Load Washer Message "No Water Detected": What to Check OFb or ofbWhirlpool Top-Load Washer Code OFb or Ofb: Load Out of Balance oLWhirlpool Top-Load Washer Code oL: Overloaded Tub PFWhirlpool Washer Code PF: Power Failure During the Cycle

F3E8F3E8 questions

Is F3E8 the same as F3E7 on a tower?

F3E7 names the wash temperature sensor, while F3E8 refers to a temperature sensor in general. We narrow it down by testing the individual circuits on the washer section instead of guessing from the code alone.

Is it safe to keep using the washer with F3E8?

Try one reset. If the code returns, the control cannot trust its temperature reading, so it is better to stop using the washer and have it checked than to keep running cycles with unreliable readings.

Will a reset fix F3E8?

It can clear a one-time glitch. If it comes back, a circuit needs testing and we tell you the price in writing first, with a 30-day workmanship warranty on the repair we complete.

Book a visit

Still seeing F3E8?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107