Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Washer

Whirlpool Washer Code F3E3: Air Inlet or Inlet Temperature Alerts

F3E3 appears on three Whirlpool washer types. On an all-in-one washer-dryer such as the WFC8090GX, it points to the air inlet function: washing still works, but drying will not run. On a laundry tower, the washer…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F3E3
Appliance
Washer
Brand
Whirlpool
Warranty
30-day workmanship

What F3E3 means

F3E3 appears on three Whirlpool washer types. On an all-in-one washer-dryer such as the WFC8090GX, it points to the air inlet function: washing still works, but drying will not run. On a laundry tower, the washer section reports the water inlet temperature sensor. On an older top-load HE washer (Cabrio or WTW series with display or blink codes), the only guidance is a power reset and no part is named. That older top-load is still in many homes, and we repair it.

Common causes of F3E3

  • Air inlet circuit on an all-in-one washer-dryer
  • Water inlet temperature sensor on a laundry tower
  • Control reading on an older top-load washer
✓ One safe check you can try

1. Pull the plug, wait at least 5 minutes, and plug the washer back in. 2. On a laundry tower, confirm hot is on hot and cold is on cold. 3. Check that both water valves are fully open. 4. On an all-in-one unit, wash cycles may still run while drying will not. 5. If F3E3 returns, schedule service.

! Why to stop there
  • The reset leaves it unclear whether the sensor, wiring or control is behind the code.
  • We check the inlet temperature or air path readings for your platform.
  • On an older top-load we say plainly if a repair is not worth it.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

LFWhirlpool Top-Load Washer Code LF: Tub Is Too Slow to Fill SudWhirlpool Washer Sud or Sd: Too Many Suds in the Tub LidWhirlpool Top-Load Washer Display Lid: Lid Opened During the Cycle uLWhirlpool Top-Load Washer Code uL: Unbalanced Load Needs Rearranging Lid Light FlashingWhirlpool Top-Load Washer Lid Light Flashing: Close the Lid or Wait for the Lock Test Wash Light On or FlashingWhirlpool Top-Load Washer Wash Light On or Flashing: Water Level Not Changing Lid Lock FlashingWhirlpool Top-Load Washer Lid Lock Light Flashing: Lock Fails to Engage Water Tap is ClosedWhirlpool Washer Symbol "Water Tap Is Closed": Water Is Not Arriving
F3E3F3E3 questions
Can I still wash with F3E3 on an all-in-one washer-dryer?

The wash function should run, but the dry function will not. Use the unit as a washer only until we check the air inlet circuit, and tell us exactly which cycles still work when you call.

What does F3E3 mean on a laundry tower?

The washer section is reporting the water inlet temperature sensor. Make sure the hoses are not swapped, reset the power for 5 minutes, and schedule service if the code returns, since the sensor circuit then needs testing.

My older top-load shows F3E3. Is it worth fixing?

These older top-loads remain in plenty of homes, and we work on them regularly. We test first, give a written price, and tell you plainly when repair makes little sense for the washer's age and condition.

Book a visit

Still seeing F3E3?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107