Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Washer

Whirlpool Front-Load Washer Code F1 E2: Unplug, Wait, Then Try Again

On Whirlpool front-load washers in the Duet and WFW family, including the WFW5620HW and WFW90HEFW, F1 E2 comes with a single instruction: cycle power to the control to reset the washer. Nothing in that instruction names…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F1 E2
Appliance
Washer
Brand
Whirlpool
Warranty
30-day workmanship

What F1 E2 means

On Whirlpool front-load washers in the Duet and WFW family, including the WFW5620HW and WFW90HEFW, F1 E2 comes with a single instruction: cycle power to the control to reset the washer. Nothing in that instruction names a sensor, a circuit or a part, so the display alone cannot say what stopped the washer or whether it will happen again. You see F1 E2 and the cycle will not continue. Older and current front-loaders show it the same way.

Common causes of F1 E2

  • A control that stopped and clears when power is removed
  • A repeat condition in the control or its wiring after the reset
  • A weak outlet or a plug that does not seat well
✓ One safe check you can try

1. Pull the washer plug and wait a full 5 minutes without pressing any buttons. 2. Push the plug in firmly. 3. Shut the door and choose a cycle. 4. If F1 E2 shows up again, do not keep resetting it over and over; arrange service so the control can be tested instead.

! Why to stop there
  • A reset is a test, and it will not tell us which part of the control raised F1 E2.
  • If it recurs, we trace it from the control board outward.
  • We quote in writing first, and say plainly if an older washer is not worth it.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

No Water DetectedWhirlpool Front-Load Washer Message "No Water Detected": What to Check OFb or ofbWhirlpool Top-Load Washer Code OFb or Ofb: Load Out of Balance oLWhirlpool Top-Load Washer Code oL: Overloaded Tub PFWhirlpool Washer Code PF: Power Failure During the Cycle Rinse Light OnWhirlpool Top-Load Washer Rinse Light On: Spray Rinse in Progress rLWhirlpool Front-Load Washer Code rL: Items Found During Clean Washer LdWhirlpool Top-Load Washer Code Ld: Water Is Slow to Leave the Tub Sd or 5dWhirlpool Top-Load Washer Code Sd or 5d: Suds Reduction Is Running
F1 E2F1 E2 questions
What should I try first for F1 E2?

Unplug the washer for 5 minutes, plug it back in and start a cycle. That reset is the only owner step the code calls for, and it costs nothing to try.

Can I use the washer if F1 E2 clears?

Yes, but watch for a repeat. If the code returns, a visit is better than running cycles that stop partway through and leave your clothes wet.

Do you service older Duet washers?

Yes. They are still in many homes and we repair them. We give a written price first, and we tell you plainly when a repair is not worth the money.

Book a visit

Still seeing F1 E2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107