Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Microwave

Whirlpool Over-the-range Microwave F6E0: Function Not Executed

F6E0 turns up on over-the-range Whirlpool microwaves like the WMH31017HS, WMH32519HZ and WMH53521HZ, and it says the requested function was not carried out by the oven. The wording behind it points to the appliance control board…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F6E0
Appliance
Microwave
Brand
Whirlpool
Warranty
30-day workmanship

What F6E0 means

F6E0 turns up on over-the-range Whirlpool microwaves like the WMH31017HS, WMH32519HZ and WMH53521HZ, and it says the requested function was not carried out by the oven. The wording behind it points to the appliance control board or the wiring that serves it. At the microwave you press a pad, the unit does not start the cycle, and F6E0 takes over the display. The code marks a circuit to examine and does not confirm a failed board.

Common causes of F6E0

  • Appliance control board
  • Wiring and connectors between the board and the keypad or loads
  • Control confused by a power interruption
✓ One safe check you can try

1. Locate the microwave's breaker and flip it down. 2. Let a full minute pass. 3. Switch the breaker on and stay with the microwave for sixty seconds, watching for F6E0. 4. If the display is quiet, try the function that failed before.

! Why to stop there
  • The reset clears a one-off hiccup, but F6E0 returning means the board or its wiring needs testing under power.
  • We start with the control board input and output, then follow the wiring, and tell you what we found before you approve work.
  • Expect a written price first, and a 30-day workmanship warranty once the repair is done.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Microwave codes

Feature Not Available or Fault DetectedWhirlpool Built-in Microwave Message "Feature Not Available": Retry or Cut Power LOCWhirlpool Microwave LOC on the Display: Control Lock Is On PFWhirlpool Over-the-range Microwave Showing PF: Power Failure Indicator Press Cancel to ResetWhirlpool Built-in Microwave Message "Press Cancel to Reset": Error Cleared by Cancel F8 E4Whirlpool Microwave Drawer Error Code F8 E4: Exhaust Air Temperature Sensor Probe or Insert ProbeWhirlpool Built-in Microwave Asking for "Insert Probe": Seat the Meat Probe F8E5Whirlpool Microwave Code F8E5: Exhaust Air Temperature Sensor PUSH or PSHWhirlpool Built-in Microwave Shows PUSH or PSH: Press Start
F6E0F6E0 questions
What function could the microwave not execute?

The code does not say which one. It reports that the requested function failed to run, and the cause lies in the control board or its wiring. We test both to find where.

Is F6E0 the same as F7 on my microwave?

They are separate codes with matching guidance, both pointing at the control board and its wiring. We run the same circuit tests for either one and name the part we find responsible.

Can I use the microwave between resets?

If a reset clears the code and the oven heats normally, you can keep using it while watching for a repeat. A repeat means it needs testing.

Book a visit

Still seeing F6E0?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107