Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Microwave

Whirlpool Built-in Microwave Codes F9 and F9E0: Home Power Supply

On Whirlpool built-in microwaves and microwave drawers, for example WMC50522AS, F9 or F9E0 most often indicates that the appliance is wired incorrectly at the home electrical supply or at the hardwire connection. Think first of a…

High · stop use, call now
Book a Service Call(713) 589-6107
Code
F9 or F9E0
Appliance
Microwave
Brand
Whirlpool
Warranty
30-day workmanship

What F9 or F9E0 means

On Whirlpool built-in microwaves and microwave drawers, for example WMC50522AS, F9 or F9E0 most often indicates that the appliance is wired incorrectly at the home electrical supply or at the hardwire connection. Think first of a recent installation, then of anything that changed in the power feeding the unit, such as an outage. You see the code and the microwave will not operate normally. Electrical supply work belongs to a licensed electrician, and we do not guess about a supply problem.

Common causes of F9 or F9E0

  • Incorrect wiring at the home electrical supply
  • Hardwire connection made wrongly at installation
  • Power supply upset after an outage
  • Control board responding to a supply problem
✓ One safe check you can try

1. If the microwave was installed recently, tell your installer or an electrician that F9 or F9E0 is showing. 2. Think back to any power outage around the time the code first appeared. 3. Turn the microwave's breaker off for one minute and back on. 4. Watch the display for a minute; if the code returns, stop using the microwave.

! Why to stop there
  • A supply wiring problem is outside what a reset can fix, so we look at what the unit receives before anything else.
  • If the unit was installed recently, the electrician who wired it may need to correct the connection; we help you tell which side the problem is on.
  • The written price comes before any work.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Microwave codes

F8E5Whirlpool Microwave Code F8E5: Exhaust Air Temperature Sensor Registration ErrorWhirlpool Over-the-range Microwave "Registration Error": Network Checks F9Whirlpool OTR Microwave Error F9: Control and Relay Boards Sabbath, Sab, 5Ab, or 5A6Whirlpool Built-in Microwave Showing Sab or 5Ab: Sabbath Mode F9QWhirlpool Over-the-range Microwave with F9Q on the Display: Power Reset Code SEWhirlpool Over-the-range Microwave Error SE: Keypad Circuit F9Q1F9Q1 on a Whirlpool Over-the-Range Microwave: Touch Pad Circuit FC E1Whirlpool Over-the-range Microwave Wi-Fi Code FC E1: Weak Signal
F9 or F9E0F9 or F9E0 questions
Why would a new microwave show F9 right after installation?

This code most often means the unit is wired incorrectly at the home supply or the hardwire connection. A licensed electrician should check the supply side and the connection.

Will resetting the breaker fix F9 or F9E0?

A reset helps only if the cause was a passing power event. After an outage you can try it once. If the code returns, the wiring or supply needs a proper check.

Can I check the wiring myself?

No. Leave the supply and hardwire connections to a licensed electrician. We can test the microwave itself and tell you whether the problem is in the unit or the supply.

Book a visit

Still seeing F9 or F9E0?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107