Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Microwave

Whirlpool Over-the-Range Microwave Code E62 for Houston Owners: Shorted Oven Sensor Circuit

E62 on a Whirlpool over-the-range microwave, including models WMH31017HS, WMH32519HZ and WMH53521HZ, means the oven sensor circuit reported a shorted condition to the control board. Here the reading collapses instead of breaking, as if two conductors…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
E62
Appliance
Microwave
Brand
Whirlpool
Warranty
30-day workmanship

What E62 means

E62 on a Whirlpool over-the-range microwave, including models WMH31017HS, WMH32519HZ and WMH53521HZ, means the oven sensor circuit reported a shorted condition to the control board. Here the reading collapses instead of breaking, as if two conductors were touching. The sensor, the appliance control board or the associated wiring may be responsible. The display shows E62 and the microwave may stop a cycle or decline to start one.

Common causes of E62

  • Oven sensor
  • Wiring or insulation damage causing a short
  • Appliance control board
✓ One safe check you can try

1. Turn the microwave's circuit breaker off and wait one minute. 2. Turn the breaker on. 3. Watch the display for a minute to see that E62 stays away. 4. Try a short cycle to check that it runs normally. 5. If E62 returns, do not keep restarting the oven.

! Why to stop there
  • We test the sensor and trace the wiring because a short can be inside the sensor or in the harness.
  • The reading from the control board is checked last so we do not replace it without need.
  • A written price comes before any repair.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Microwave codes

F8 E4Whirlpool Microwave Drawer Error Code F8 E4: Exhaust Air Temperature Sensor Probe or Insert ProbeWhirlpool Built-in Microwave Asking for "Insert Probe": Seat the Meat Probe F8E5Whirlpool Microwave Code F8E5: Exhaust Air Temperature Sensor PUSH or PSHWhirlpool Built-in Microwave Shows PUSH or PSH: Press Start F9Whirlpool OTR Microwave Error F9: Control and Relay Boards Registration ErrorWhirlpool Over-the-range Microwave "Registration Error": Network Checks F9 or F9E0Whirlpool Built-in Microwave Codes F9 and F9E0: Home Power Supply Sabbath, Sab, 5Ab, or 5A6Whirlpool Built-in Microwave Showing Sab or 5Ab: Sabbath Mode
E62E62 questions
What does a shorted sensor circuit mean?

The control reads the circuit as if its two sides were touching. A sensor, a harness or the board could be the cause. We find out which by testing.

Is E62 the same as E63?

The guidance for E62 and E63 is the same, and both describe a shorted oven sensor circuit. We test the same area for either one.

Can you fix this on an older microwave?

Yes, we repair older over-the-range units that are still in many Houston homes, and we tell you honestly whether a repair makes sense for your microwave.

Book a visit

Still seeing E62?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107