Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Washer

Whirlpool Front-Load Washer Code F1 E1: Reset It for 5 Minutes

F1 E1 is shown on Whirlpool front-load washers, the Duet and WFW series such as the WFW5620HW, WFW9150WW and WFW90HEFW, in both current and older generations. The guidance for it is only to cycle power to…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F1 E1
Appliance
Washer
Brand
Whirlpool
Warranty
30-day workmanship

What F1 E1 means

F1 E1 is shown on Whirlpool front-load washers, the Duet and WFW series such as the WFW5620HW, WFW9150WW and WFW90HEFW, in both current and older generations. The guidance for it is only to cycle power to the control, which means the display does not name a sensor, valve or other part. The washer stops with F1 E1 showing. Because no part is named, we read it as a control-level code that a reset may clear.

Common causes of F1 E1

  • A control that stalled and clears after power is removed
  • A control or connection condition that returns after a reset
  • Power at the outlet or a loose plug
✓ One safe check you can try

1. Disconnect the washer by pulling its plug. 2. Leave it unplugged for 5 minutes. 3. Plug it back in and close the door. 4. Select a cycle and start it. 5. If F1 E1 comes back, stop and schedule service.

! Why to stop there
  • The reset shows whether it was a one-off, not which circuit raised F1 E1.
  • We test the control and its connections when the code returns.
  • The price comes in writing first, with no work before you agree.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

LFWhirlpool Top-Load Washer Code LF: Tub Is Too Slow to Fill SudWhirlpool Washer Sud or Sd: Too Many Suds in the Tub LidWhirlpool Top-Load Washer Display Lid: Lid Opened During the Cycle uLWhirlpool Top-Load Washer Code uL: Unbalanced Load Needs Rearranging Lid Light FlashingWhirlpool Top-Load Washer Lid Light Flashing: Close the Lid or Wait for the Lock Test Wash Light On or FlashingWhirlpool Top-Load Washer Wash Light On or Flashing: Water Level Not Changing Lid Lock FlashingWhirlpool Top-Load Washer Lid Lock Light Flashing: Lock Fails to Engage Water Tap is ClosedWhirlpool Washer Symbol "Water Tap Is Closed": Water Is Not Arriving
F1 E1F1 E1 questions
How long do I unplug a Duet for F1 E1?

Five minutes. Unplug it from the outlet, wait the full time without pressing buttons, plug it back in, close the door and start a cycle again.

Does F1 E1 mean the washer is finished?

No. The code names no part, and many washers carry on after a reset. If F1 E1 returns right away, we look at the control and its connections.

Will it lose my settings?

Possibly the current cycle, so select it again. The reset does not harm the washer, and if the code stays away you have lost nothing but a few minutes.

Book a visit

Still seeing F1 E1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107