Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Washer

Whirlpool Stacked Laundry Center Code F 22: Unplug and Retry

You may see F 22 on the washer half of a stacked Whirlpool laundry center from the older generation that prints error codes on some models. The code tells the owner only one thing to do,…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F 22
Appliance
Washer
Brand
Whirlpool
Warranty
30-day workmanship

What F 22 means

You may see F 22 on the washer half of a stacked Whirlpool laundry center from the older generation that prints error codes on some models. The code tells the owner only one thing to do, which is to remove power and let the control start over. It does not name a sensor, a valve or any other part, so the display alone cannot tell us what stopped the cycle. The washer stops and F 22 stays on. These laundry centers are still running in plenty of homes, and our technicians keep working on them.

Common causes of F 22

  • A control that stopped mid-cycle and clears when power is removed
  • A condition that comes back after the reset, which points us to the control board and its harness
  • A loose cord or a weak outlet feeding the unit
✓ One safe check you can try

1. Pull the washer plug from the outlet and leave it out for at least 2 minutes, up to 5. 2. Check that the cord and plug are undamaged, then plug in again. 3. Close the lid or door, select a short cycle and start it. 4. If F 22 appears again, leave the machine and book a visit instead of cycling it repeatedly.

! Why to stop there
  • A reset only clears a stalled control; it does not tell us which circuit raised F 22.
  • If the code returns, we open the machine and trace it from the control outward.
  • You get the price in writing before we touch anything, and an honest word if the laundry center is past worth repairing.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

No Water DetectedWhirlpool Front-Load Washer Message "No Water Detected": What to Check OFb or ofbWhirlpool Top-Load Washer Code OFb or Ofb: Load Out of Balance oLWhirlpool Top-Load Washer Code oL: Overloaded Tub PFWhirlpool Washer Code PF: Power Failure During the Cycle Rinse Light OnWhirlpool Top-Load Washer Rinse Light On: Spray Rinse in Progress rLWhirlpool Front-Load Washer Code rL: Items Found During Clean Washer LdWhirlpool Top-Load Washer Code Ld: Water Is Slow to Leave the Tub Sd or 5dWhirlpool Top-Load Washer Code Sd or 5d: Suds Reduction Is Running
F 22F 22 questions
Is F 22 serious?

Not by itself. It is a general code with a power reset as the only owner step. If it comes back after a clean restart, it is worth having the control checked.

How long should the washer stay unplugged?

Between 2 and 5 minutes is enough for the control to reset. Longer does no harm, but it will not change the result if the underlying condition is still there.

Can the dryer on top keep running?

The two sections may share a cabinet and power cord, so test the dryer after the restart. If only the washer shows a code, tell us when you call.

Book a visit

Still seeing F 22?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107