Error code · Washer

Whirlpool Laundry Center Washer Code F 01: Reset the Power First

F 01 appears on the washer section of an older Whirlpool stacked laundry center, one of the models that print error codes. The only guidance for F 01 is a power reset, and it does not…

Medium · inspection needed

(713) 589-6107

Code: F 01
Appliance: Washer
Brand: Whirlpool
Warranty: 30-day workmanship

What F 01 means

F 01 appears on the washer section of an older Whirlpool stacked laundry center, one of the models that print error codes. The only guidance for F 01 is a power reset, and it does not point to a single part, so we treat it as a control-level condition rather than a known failure. You see F 01 and the washer will not run. These older laundry centers remain in many homes. We do repair them, and we will tell you plainly if a repair is not worth it.

Common causes of F 01

A control that locked up and clears with a power reset
A control or wiring condition that returns after the reset
Power supply to the outlet or the cord connection

✓ One safe check you can try

1. Unplug the washer for 2 to 5 minutes so the machine can reset. 2. Plug it back in and start a short cycle. 3. If the code returns, do not keep cycling the power. Note when it appears and schedule service.

! Why to stop there

Because F 01 names no part, we start with the control and its connections instead of guessing.
We check whether the code returns immediately or only during a certain stage.
Written price first, and a plain recommendation if an older unit is not worth repairing.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Lo FLWhirlpool Front-Load Washer Code Lo FL: Not Detecting Enough Incoming Water What does the "SUD" or "SD" meanWhirlpool Washer Display SUD or SD: What It Means and How to Clear It LoCWhirlpool Front-Load Washer LoC or LC: Control Lock Is Switched On Multiple Lights FlashingWhirlpool Top-Load Washer with Several Lights Flashing: Out-of-Balance Load No Water DetectedWhirlpool Front-Load Washer Message "No Water Detected": What to Check OFb or ofbWhirlpool Top-Load Washer Code OFb or Ofb: Load Out of Balance oLWhirlpool Top-Load Washer Code oL: Overloaded Tub PFWhirlpool Washer Code PF: Power Failure During the Cycle

F 01F 01 questions

What does F 01 mean?

It is a control-level code on older laundry center washers that names no particular part. Unplugging the unit for 2 to 5 minutes is the one thing to try; after that it needs a look.

Can I reset it more than once?

One careful reset is reasonable. If F 01 comes straight back, repeated resets will not help, and we should inspect the control and its connections instead.

Should I replace the machine?

Not before an inspection. A power reset costs nothing, and many older units keep running for years. We give you a written price and say plainly if repairing a unit this age is not worth it.

Book a visit

Still seeing F 01?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107