WFG510S0HB
Whirlpool WFG510S0HB Free Standing Gas Range Repair
Most common issues on this model
- Burner lighting after a boil-over
- Oven igniter glow and gas valve response
- Flame height when the knob is turned to low
- Gas connector and shutoff behind the range
Here is what a technician needs to know about the Whirlpool WFG510S0HB: it is a free standing gas range, and its number also turns up as WFG510S0HB0, WFG510S0HB1 and WFG510S0HS0. A range like this stands alone on the kitchen floor with a gas line at the back wall.
A boil-over is the classic event that starts a service call on this type of range. Liquid reaches the burner base, the electrode gets wet, and the burner either clicks without lighting or refuses to stay lit. We dry and clean the head, test the spark switch and check the flame at low. After the cooktop, we turn to the oven and watch the igniter and the valve through a full warm-up.
The label gets read before any part is ordered. You receive the estimate in writing ahead of the work, and the labor is warranted for 30 days.
Key features
- Gas fuel
- Free standing style
- Same number with WFG510S0HB1 or WFG510S0HS0 on the label
Error codes this model can show
Soup boiled over and now a burner will not light. Is it ruined?
Usually not. Liquid in the burner base or on the electrode stops the spark. We dry and clean the head, test the electrode and switch, and replace parts only if they test bad.
What does a flame at the low setting tell you?
A flame that goes out at low can mean a dirty port, a misaligned cap or a problem with the burner valve. We look at the cap and port first because cleaning costs the least.
Do I need a technician if I smell gas?
Turn the range off, open a window, and do not use switches or flames. If the smell stays, call your gas utility. Once the area is safe, we can inspect the connector and burner valves on the range.
Book repair for your WFG510S0HB
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.