Error code · Range

Whirlpool Range Hot Light On: Control Still On or Surface Hot

Low risk · DIY check OK

Code: Indicator or Hot Light On
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What Indicator or Hot Light On means

On a Whirlpool freestanding or slide-in range, gas or electric, such as the WFE525S0HS or WFG515S0ES, an indicator or hot light that stays lit has a plain meaning. Either a cooktop control is still on, or an element or burner is still too hot to touch safely. It works as a warning for you, not as an error from the range. If the light stays lit after everything is off and cool, a power reset at the breaker is the next published step.

Common causes of Indicator or Hot Light On

A cooktop control left on
Surface still hot after cooking
Light staying lit after controls are off and the surface is cool
Cooktop control circuit holding the indicator on

✓ One safe check you can try

1. Check that every cooktop control is turned off. 2. Let the cooktop cool; keep hands and cloths away while it is hot. 3. If the light is still on once it has cooled, turn off the range's circuit breaker for one minute. 4. Turn the breaker back on. 5. Watch the cooktop for one minute and verify it operates.

! Why to stop there

A light that stays on after a cool-down and a reset suggests a control reading we need to test, not a leftover hot surface
We would check the cooktop controls and indicator circuit in person and give a written price before work
Gas burners that will not shut off, or any gas smell, mean leaving the house and calling the gas utility from outside

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode LockWhirlpool Range Cooktop Lock: Unlocking the Surface Controls PowerLossWhirlpool Range and Wall Oven PowerLoss: Reset the Time Press Cancel to ResetWhirlpool Range Message "Press Cancel to Reset": What to Do Probe or Insert ProbeWhirlpool Range Probe Message: Meat Probe Not Detected FEE6Whirlpool Range Code FEE6: Bake Element Circuit

Indicator or Hot Light OnIndicator or Hot Light On questions

Is the hot light a sign something is broken?

Not on its own. It tells you a control is on or a surface is still hot. Give the cooktop time to cool and make sure everything is off before you suspect a problem.

What if the light stays on after the cooktop cools?

Reset power at the breaker for one minute, then restore it and watch for a minute. If the light is still lit, the control circuit needs testing, and that is where we come in.

Do you repair older cooktops with this light?

Yes. Older Whirlpool ranges remain in many Houston homes and we repair them. You get a written price first, a 30-day workmanship warranty, and a candid opinion when a repair is not worth it.

Book a visit

Still unsure about Indicator or Hot Light On?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107