Error code · Range

Whirlpool Range Message “Press Cancel to Reset”: What to Do

Medium · inspection needed

Code: Press Cancel to Reset
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What Press Cancel to Reset means

Press Cancel to Reset is a message some Whirlpool freestanding and slide-in ranges, such as the WFE515S0ES or WFG525S0HV, put on the display when the control has detected a problem or error. The instruction is exactly what it says: press the Cancel pad. If a Call Service message shows up after you press Cancel, the next published step is a power reset at the breaker. The message does not say what caused it, so it is a prompt first and a diagnosis second.

Common causes of Press Cancel to Reset

One-time control error cleared by Cancel
Problem that returns after Cancel, needing a power reset
Control reading a circuit wrongly during a cycle
Wiring or sensor input behind a repeat message

✓ One safe check you can try

1. Press the Cancel pad once. 2. If Call Service appears, turn off the range's circuit breaker for one minute. 3. Turn the breaker back on. 4. Start a bake cycle. 5. Watch the oven for one minute to make sure the message does not return, then verify normal operation.

! Why to stop there

Cancel and a reset clear the message, but neither tells us what the control detected
If it repeats, we note which cycle brings it back and test that circuit, with a written price before any work
A gas smell at any time means leaving the house and calling the gas utility from outside

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot

Press Cancel to ResetPress Cancel to Reset questions

What do I do when the display says Press Cancel to Reset?

Press Cancel. If Call Service shows afterward, switch the breaker off for one minute and back on, then start a bake cycle. That is the published sequence, and it needs no tools.

Does the message mean the oven is unsafe?

It means the control noticed a problem or error. It does not name a part. If it keeps coming back, stop using that cycle and call us so we can test what the control is reacting to.

Do you repair older ranges that show this?

Yes. Older ranges from this line are a regular part of our Houston calls. We quote in writing, give a 30-day workmanship warranty, and say plainly when a repair is not worth it.

Book a visit

Still seeing Press Cancel to Reset?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107