Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Range

F2E6 Code on a Whirlpool Wall Oven or Range: Interface Circuit Inspection

The F2E6 code is displayed by Whirlpool freestanding and slide-in ranges as well as built-in wall ovens, including models such as the WFG525S0HV and WOD51EC0HS. Its published handling is a breaker reset for one minute, and…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F2E6
Appliance
Range
Brand
Whirlpool
Warranty
30-day workmanship

What F2E6 means

The F2E6 code is displayed by Whirlpool freestanding and slide-in ranges as well as built-in wall ovens, including models such as the WFG525S0HV and WOD51EC0HS. Its published handling is a breaker reset for one minute, and it names the user interface or keypad, the control, and the associated wiring as the areas involved. It sits at the end of the F2E series, and as with the others, the last digit is not translated into a separate meaning. The owner sees the code on the display and possibly an oven that will not take commands.

Common causes of F2E6

  • User interface or keypad circuit
  • Wiring harness behind the panel
  • Control board
  • Heat or humidity affecting the connection
✓ One safe check you can try

1. Make sure the oven door is closed and the racks are seated. 2. Switch off the oven's circuit breaker for one minute. 3. Switch the breaker on. 4. Monitor the display for one minute to see whether F2E6 returns. 5. Verify operation by running a short cycle.

! Why to stop there
  • We can only narrow it down by testing the circuit, because the display gives the family and not the exact part
  • If F2E6 returns after your reset, we inspect the connections first, then the panel and the control
  • Our price is in writing before work starts
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot
F2E6F2E6 questions
Is F2E6 the last one in the series?

It is the highest F2E code this guidance lists. We treat every one the same way: reset first, then a circuit test if the code returns, with a written price before any repair.

Does it matter if my oven is a range or a wall unit?

The reset is identical, and both lists of suspects are the interface, the control and the wiring. The actual parts depend on your model, which we identify on site.

Should I turn the oven on and off at the wall switch?

Use the circuit breaker for the one-minute reset. Do not open the cabinet or touch wiring; leave anything beyond the breaker to us, and we will explain what we find.

Book a visit

Still seeing F2E6?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107