Error code · Range

Whirlpool Range Showing F1-A: Checking the Door Lock Switch

Medium · inspection needed

Code: F1-A
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What F1-A means

The display of Whirlpool freestanding and slide-in ranges such as the WFE515S0ES and WFG525S0HV can read F1-A. The guidance is a power reset, together with three areas to look at: the oven door latch, the door lock switch and the connecting wiring. The oven is therefore saying that the lock side of its door is not reporting properly. The code is shown on the display, and cycles that rely on the door lock, such as cleaning, may not run.

Common causes of F1-A

Oven door latch
Door lock switch
Wiring to the latch and switch

✓ One safe check you can try

1. Push the oven door shut and look for anything keeping it from closing fully. 2. At the household panel, cut power to the range for sixty seconds. 3. Restore power and keep an eye on the display for a minute. 4. Bake something simple to see that the oven behaves normally.

! Why to stop there

A reset does not show whether the latch, the lock switch or the wiring is weak
We watch the latch move and test the switch contacts before replacing anything
The price is quoted in writing before work, and a cleaning cycle should wait until the lock is checked

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot Lo or PreWhirlpool Range Lo or Pre: Low Temperature and Preheating

F1-AF1-A questions

How does F1-A compare with F1-C?

The guidance names the same door parts for both and gives the same reset. We cannot say how they differ, so we test the range on site.

Will the door stay locked?

We cannot tell. If the door seems stuck shut or will not close, do not force it. Switch the range off at the breaker and call us.

Can I run a self-clean cycle with this code?

We advise against it, since cleaning relies on the door lock. Have the lock circuit checked first so the cycle does not leave the door in the wrong state.

Book a visit

Still seeing F1-A?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107