Error code · Range

Whirlpool Range F1-1: Older Oven Sensor Message

Medium · inspection needed

Code: F1-1
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What F1-1 means

F1-1 belongs to an older generation of Whirlpool freestanding and slide-in ranges, models including the WFE515S0ES family, that print the code with a dash. Plenty of these ovens are still in Houston kitchens, and we repair them. The published response is a power reset, with the oven temperature sensor, the control and the wiring named as the areas involved. So the oven may be struggling to read or act on its temperature, and you will see the code on the display.

Common causes of F1-1

Oven temperature sensor
Wiring harness to the sensor
Control board input

✓ One safe check you can try

1. Let the oven cool and remove anything inside. 2. Turn off the range's breaker for one minute. 3. Turn it on again. 4. Watch for one minute to see if F1-1 comes back. 5. Test with a short bake.

! Why to stop there

Older ranges have older connectors, and a marginal connection can look like a failed part until it is tested
We check the sensor, its wiring and the control before recommending anything
If the range is too old to repair sensibly, we say so plainly before you spend money

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot

F1-1F1-1 questions

Could F1-1 be confused with F11?

No. The dash is part of the older display style, so F1-1 is its own code on its own page. Please tell us exactly what your display shows if you are unsure.

Can a range this old still be repaired?

Usually yes. Parts for many older Whirlpool ranges can still be found, and we repair them regularly. We quote in writing first and say honestly if replacing the range would be the wiser choice.

Is it safe to use the burners meanwhile?

The code concerns the oven, but we cannot promise the rest of the range is unaffected. If anything acts strangely, shut it off at the breaker.

Book a visit

Still seeing F1-1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107