Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Range

Whirlpool Range or Wall Oven with F06: Electronic Control Check

You may see F06 on a Whirlpool range, either freestanding or slide-in, including the WFE525S0HS and WFG515S0ES, or on a built-in wall oven such as the WOD51EC0HS or WOS72EC7HS. The guidance is a power reset only,…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F06
Appliance
Range
Brand
Whirlpool
Warranty
30-day workmanship

What F06 means

You may see F06 on a Whirlpool range, either freestanding or slide-in, including the WFE525S0HS and WFG515S0ES, or on a built-in wall oven such as the WOD51EC0HS or WOS72EC7HS. The guidance is a power reset only, and it points to the electronic control and the wiring around it. That makes this a code about the oven's control electronics, not about heat sensing or the door. The code remains on the display and the oven may not start a cycle.

Common causes of F06

  • Electronic control not completing its self-check
  • Wiring or connector feeding the control
  • Power interruption that left the control in a bad state
✓ One safe check you can try

1. Turn the breaker for the oven off, wait one full minute, then turn it back on. 2. Look at the display for one minute and note whether F06 returns. 3. If it stays away, start a short bake to check that the oven behaves. 4. If it returns, leave the oven off.

! Why to stop there
  • We cannot tell from the display if the control itself or only its wiring is the issue
  • Connections and wiring are examined before any control is quoted
  • The written price is yours to approve before work starts
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot Lo or PreWhirlpool Range Lo or Pre: Low Temperature and Preheating LOCLOC on a Whirlpool Range or Wall Oven: Control Lock Is On LockWhirlpool Range Cooktop Lock: Unlocking the Surface Controls PowerLossWhirlpool Range and Wall Oven PowerLoss: Reset the Time
F06F06 questions
Is F06 the same as F03 or F04?

The guidance for those codes also names the control and wiring, but it does not say how they differ. We treat each one separately and test the oven on site.

Will turning the breaker off harm the oven?

No, switching the oven's breaker off for a minute is the published reset. Just leave the oven empty and cool, and do not open panels.

Can this code appear on an older wall oven?

Yes, and older Whirlpool wall ovens remain common in Houston. We repair them, and we tell you plainly when a repair is not a good use of your money.

Book a visit

Still seeing F06?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107