Error code · Range

Whirlpool Range and Wall Oven Code F01: Oven Sensor Message

Medium · inspection needed

Code: F01
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What F01 means

F01 appears on Whirlpool freestanding and slide-in ranges (the WFE515S0ES and WFG525S0HV among them) and also on built-in wall ovens such as the WOS51EC0HS, WOD51EC0HS and WOC54EC7HS. On both, the guidance is a power reset, with the oven temperature sensor, the control and the associated wiring named as the places a problem may be. In plain words, the oven is not getting a trustworthy temperature reading or is not handling it properly, and the code stays on the display.

Common causes of F01

Oven temperature sensor reading
Wiring or connector to the sensor
Control receiving the sensor signal

✓ One safe check you can try

1. Let the oven cool and make sure it is empty. 2. Turn the breaker for the range or wall oven off for one minute. 3. Turn the breaker on. 4. Monitor the oven for one minute to see whether F01 comes back. 5. Verify normal operation with a short bake.

! Why to stop there

A returning F01 means the reset did not remove the cause, and the sensor reading must be checked
We test the sensor, its wiring and the control in that order and explain what we find before quoting
Wall oven and range are tested the same way, but the access differs and we handle that

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode Lo or PreWhirlpool Range Lo or Pre: Low Temperature and Preheating LOCLOC on a Whirlpool Range or Wall Oven: Control Lock Is On LockWhirlpool Range Cooktop Lock: Unlocking the Surface Controls PowerLossWhirlpool Range and Wall Oven PowerLoss: Reset the Time Press Cancel to ResetWhirlpool Range Message "Press Cancel to Reset": What to Do

F01F01 questions

Is F01 the same on a wall oven and a range?

Both are reset the same way and the guidance names the same areas. The parts are laid out differently, so a technician checks each model on site.

Can I use the cooktop on my range with F01?

The code is about the oven, so the cooktop may still work, but we cannot be sure. If the range acts oddly, switch it off at the breaker.

Will you fix an older built-in oven?

Yes. Many older Whirlpool wall ovens and ranges are still in use in Houston. We repair them and say plainly when a repair does not make sense.

Book a visit

Still seeing F01?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107