Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Microwave

Whirlpool Built-In Microwaves and Drawers Code 3d41: Probe Receptacle Check

Code 3d41 on a Whirlpool built-in microwave or microwave drawer, such as model WMC50522AS, directs you to the meat probe first. The probe has to be seated securely in its receptacle, and where that receptacle is…

Low risk · DIY check OK
Book a Service Call(713) 589-6107
Code
3d41
Appliance
Microwave
Brand
Whirlpool
Warranty
30-day workmanship

What 3d41 means

Code 3d41 on a Whirlpool built-in microwave or microwave drawer, such as model WMC50522AS, directs you to the meat probe first. The probe has to be seated securely in its receptacle, and where that receptacle is located depends on the model. If the probe sits loosely, the oven reports the code instead of cooking by probe temperature. Only after that is checked does the problem become a circuit question.

Common causes of 3d41

  • Probe not fully seated in the receptacle
  • Receptacle contact worn or dirty
  • Probe circuit condition cleared by restarting the oven
✓ One safe check you can try

1. Push the meat probe in until it is secure in its receptacle. 2. Switch the microwave breaker off for one minute. 3. Switch it back on. 4. Monitor the oven for one minute to see whether 3d41 reappears. 5. Then confirm the oven runs a short test normally.

! Why to stop there
  • When 3d41 persists with the probe seated, we test the probe and the receptacle connection
  • We check for contact trouble that is not visible from outside
  • You approve the written price first, and workmanship carries a 30-day warranty
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Microwave codes

F8 E4Whirlpool Microwave Drawer Error Code F8 E4: Exhaust Air Temperature Sensor Probe or Insert ProbeWhirlpool Built-in Microwave Asking for "Insert Probe": Seat the Meat Probe F8E5Whirlpool Microwave Code F8E5: Exhaust Air Temperature Sensor PUSH or PSHWhirlpool Built-in Microwave Shows PUSH or PSH: Press Start F9Whirlpool OTR Microwave Error F9: Control and Relay Boards Registration ErrorWhirlpool Over-the-range Microwave "Registration Error": Network Checks F9 or F9E0Whirlpool Built-in Microwave Codes F9 and F9E0: Home Power Supply Sabbath, Sab, 5Ab, or 5A6Whirlpool Built-in Microwave Showing Sab or 5Ab: Sabbath Mode
3d413d41 questions
What is the first fix for 3d41?

Reseat the meat probe so it is firmly in its receptacle. Then cut the breaker for one minute, restore it, and watch the oven. Most owners can finish there.

Why would a seated probe still give this code?

Contact at the receptacle or inside the probe may be poor, or the probe circuit may have a condition. We test those directly rather than guess.

Do you service microwaves with a probe feature that are many years old?

Yes. Older built-in models are still working in plenty of Houston homes, and we repair them or tell you plainly when a repair is not worth it.

Book a visit

Still unsure about 3d41?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107