Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Dryer

Whirlpool Dryer Message Water Tank: Tank Full or Not Seated

The Water Tank message on a Whirlpool dryer appears as a symbol or text and means there is an issue with the water tank. It may mean the tank is full of water, in which case…

Low risk · DIY check OK
Book a Service Call(713) 589-6107
Code
Water Tank
Appliance
Dryer
Brand
Whirlpool
Warranty
30-day workmanship

What Water Tank means

The Water Tank message on a Whirlpool dryer appears as a symbol or text and means there is an issue with the water tank. It may mean the tank is full of water, in which case it needs to be emptied as directed in the Cleaning and Maintenance section of the owner's manual. It may also mean the tank is not correctly positioned, so it needs to be pushed in until it is properly inserted in its compartment. The message is common on dryers that collect water instead of venting it outside.

Common causes of Water Tank

  • Tank full of collected water
  • Tank not pushed fully into its compartment
  • Level sensing for the tank
  • Water path to the tank blocked
✓ One safe check you can try

1. Pull out the water tank and empty it as your owner's manual directs. 2. Slide it back in and push until it is properly inserted in the tank compartment. 3. Close the door and restart the cycle. 4. If the message keeps coming back right after emptying, schedule service.

! Why to stop there
  • A tank that is empty and seated but still flagged points to the level sensing
  • A tank filling too fast can point to the water path
  • The price is written down first, and on an older dryer we tell you honestly whether repair makes sense
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dryer codes

LocWhirlpool Dryer Code Loc: Control Lock Turned On by Mistake PFWhirlpool Dryer PF Code: Power Failure During a Cycle tSWhirlpool Dryer Code tS: Thermistor Reading Out of Range F6E4Whirlpool Laundry Tower Dryer F6E4 Code: Control Communication with the Panel F6E5Whirlpool Laundry Tower Dryer Code F6E5: Control Link Lost F7E1Whirlpool Dryer Code F7E1: Motor System, Control or Wiring F7E2Whirlpool Tower Dryer F7E2 Code: Fan Circuit on Ventless, Control Unit on Stacked F7E3Whirlpool Ventless Tower Dryer Code F7E3: Compressor Circuit in the Cooling System
Water TankWater Tank questions
Why does my dryer show Water Tank?

The tank is probably full or not pushed fully in. Empty it and seat it firmly. The message should disappear and the cycle can continue.

How do I empty the tank?

Follow the Cleaning and Maintenance section of your owner's manual for your model. Pull the tank out, pour the water out, and slide it back in until it is seated.

It still shows after I emptied it, now what?

Check once more that the tank is pushed all the way in. If the message persists, the level sensing or the water path may need testing, and we can look at it.

Book a visit

Still unsure about Water Tank?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107