Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Dryer

Whirlpool Dryer Code L2: Low Line Voltage at the Dryer

L2 means low or no line voltage and appears on Whirlpool WED / WGD electric and gas dryers, including Cabrio and Duet, and on HybridCare heat-pump dryers. It says there may be a problem with the…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
L2
Appliance
Dryer
Brand
Whirlpool
Warranty
30-day workmanship

What L2 means

L2 means low or no line voltage and appears on Whirlpool WED / WGD electric and gas dryers, including Cabrio and Duet, and on HybridCare heat-pump dryers. It says there may be a problem with the home power supply that keeps the dryer's heater from turning on, and the dryer keeps running while it shows. On HybridCare dryers the code can appear during the initial installation. Some owners also see F4E4 describe the same condition on a WED / WGD dryer.

Common causes of L2

  • Dryer circuit breaker or fuse (an electric dryer uses two)
  • Power cord installation at the dryer
  • Outlet or terminal connection
  • Home wiring feeding the dryer
✓ One safe check you can try

1. Touch any pad to clear the code. 2. Check whether a household fuse blew or a breaker tripped; electric dryers use two. 3. Reset the breaker or replace the fuse. 4. Confirm the power cord is installed properly, as the installation instructions describe. 5. Select a timed dry heated cycle and restart. 6. If L2 stays, call a qualified electrician or us.

! Why to stop there
  • Half a supply can come from the breaker panel, the outlet or inside the dryer
  • We measure before we decide where the problem is
  • We give a written price first, and we are honest if the repair belongs with an electrician
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dryer codes

LocWhirlpool Dryer Code Loc: Control Lock Turned On by Mistake PFWhirlpool Dryer PF Code: Power Failure During a Cycle tSWhirlpool Dryer Code tS: Thermistor Reading Out of Range Water TankWhirlpool Dryer Message Water Tank: Tank Full or Not Seated F6E5Whirlpool Laundry Tower Dryer Code F6E5: Control Link Lost F7E1Whirlpool Dryer Code F7E1: Motor System, Control or Wiring F7E2Whirlpool Tower Dryer F7E2 Code: Fan Circuit on Ventless, Control Unit on Stacked F7E3Whirlpool Ventless Tower Dryer Code F7E3: Compressor Circuit in the Cooling System
L2L2 questions
Why does the dryer run but not heat with L2?

The drum motor can run on one side of the supply while the heater needs both. L2 warns that voltage looks low or absent for the heater.

Why does L2 show on a new HybridCare dryer?

It can appear during initial installation when the supply or cord connection is not complete. Check the breakers and the cord installation first, and call an electrician if it stays.

Is L2 the same as F4E4?

On a WED / WGD dryer, F4E4 describes the same low or no line voltage condition. Different generations use different display wording, but the first checks are the same.

Book a visit

Still seeing L2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107