Error code · Range

Whirlpool Range Code FEE7: Checking the Broil Element Circuit

High · stop use, call now

Code: FEE7
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What FEE7 means

FEE7 on a Whirlpool freestanding or slide-in range, gas or electric, such as the WFE525S0HS or WFG515S0ES, is tied to the main oven cavity's broil element and the wiring that goes with it. That is the heat source at the top of the oven. The guidance gives one owner step, a power reset at the breaker, and names no further cause. You will see FEE7 on the display, and broiling, or any mode that relies on the top element, may not work until it clears.

Common causes of FEE7

Main cavity broil element circuit
Wiring or connector at the top element
Control board output to the broil circuit

✓ One safe check you can try

1. Switch off the range's circuit breaker and leave it off for one minute. 2. Switch it back on. 3. Watch the oven for one minute to see whether FEE7 reappears. 4. Try a short, normal oven setting to verify operation. 5. If FEE7 is back, stop using the oven and let us know.

! Why to stop there

Once the power is restored we still do not know if the element, its wiring or the control triggered FEE7
If it returns, we test the top-heat circuit in sequence and quote the work in writing before starting
The element and its leads carry line voltage, so please leave them closed up

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot Lo or PreWhirlpool Range Lo or Pre: Low Temperature and Preheating

FEE7FEE7 questions

What does FEE7 point to on my Whirlpool range?

It points to the main cavity broil element or its wiring. Only a reset is offered to owners. When FEE7 repeats, we test which part of that circuit is responsible before suggesting any repair.

Why does broiling stop when FEE7 shows?

The broil element is the top heat source, so a problem in its circuit can interrupt any mode that uses it. Baking from below may behave differently. Tell us which modes still work when you call.

Do you handle older ranges showing FEE7?

Yes. Older Whirlpool ranges are still in many Houston kitchens. We quote first in writing, give a 30-day workmanship warranty, and tell you straight when repairing an aging range is not the best use of money.

Book a visit

Still seeing FEE7?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107