Error code · Range

Whirlpool Range and Wall Oven Code F2: Oven Sensor Circuit Alert

Medium · inspection needed

Code: F2
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What F2 means

An F2 on a Whirlpool range, gas or electric, freestanding or slide-in, such as the WFE515S0ES or WFG525S0HV, steers attention to the oven temperature sensor, the control board and the wiring joining them. Built-in wall ovens, single, double and microwave-combo, such as the WOS51EC0HS or WOC54EC7HS, display the same F2, although one version of their instructions names no part at all. Put simply, the oven is not receiving a believable temperature reading. The display shows the code, and the oven may refuse to heat or quit partway through a cycle.

Common causes of F2

Oven temperature sensor reading outside its normal range
Wiring or connector between the sensor and the control
Control board misreading the sensor input
Heating that does not match what the sensor reports

✓ One safe check you can try

1. Allow the oven to cool and push the door fully shut. 2. Flip the oven's breaker to off and count a full minute. 3. Restore power at the breaker. 4. Stay nearby for a minute and see whether F2 reappears. 5. Bake something simple to confirm the oven behaves normally. On a wall oven, begin a cycle once power is back.

! Why to stop there

A reset clears a one-time glitch but cannot tell us whether the sensor, the wiring or the control is the weak link
If F2 returns we check the sensor's reading and the connection to the control, then give you a written price before any work
Older ranges and wall ovens still in many Houston homes are welcome; we say plainly when a repair is not worth it

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot Lo or PreWhirlpool Range Lo or Pre: Low Temperature and Preheating

F2F2 questions

Is F2 the same on a range and a wall oven?

The code and the reset routine match, and the lists of suspects include the oven temperature sensor, the control and the wiring. Wall-oven models may differ in which sensor is meant, so we confirm by model on site.

Can I keep cooking on the cooktop with F2 showing?

The code concerns the oven, but if the display is acting strangely, switch the breaker off and have the range looked at. Never open panels yourself. A gas smell means leaving the house and calling the utility from outside.

Will resetting the breaker fix it?

Sometimes a one-time glitch clears and the code stays away. If F2 returns, the reset has not removed the cause, and we test the sensor circuit and the control, with the price in writing first.

Book a visit

Still seeing F2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107