Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Model library · Whirlpool Range

YWFES5730SB

Whirlpool YWFES5730SB Electric Range Repair with Written Estimate

Book a Service Call(713) 589-6107

Most common issues on this model

  1. Cooktop zone that will not switch on at any setting
  2. Bake element with a visible split or bubble
  3. Oven that clicks but does not heat
  4. Door that drops open or will not stay shut

This page covers the YWFES5730SB, a free-standing electric range. It sits on the floor between counters, uses a 240-volt supply, and has both surface and oven elements to maintain. We repair it in houses and apartments across Houston, wherever a range of this type has been in daily use.

The first thing we sort out is whether the problem is a single part or the power feeding it. A cooktop zone that is dead at every setting points to the element, receptacle or switch. An oven that clicks but stays cold suggests the bake element or a relay. A bake element with a split or bubble is plain to see once the oven floor panel is lifted.

Four endings are listed, among them YWFES5730SB0, YWFES5730SV0 and YWFES5730SW0, which is why we check the plate before ordering. Expect a written estimate up front and a 30-day warranty on our labor.

Key features

  • Free-standing electric range
  • Also sold as YWFES5730SB0, YWFES5730SV0 and YWFES5730SW0
  • Four listed revision endings
→Codes

Error codes this model can show

Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot
YWFES5730SBYWFES5730SB questions
My oven clicks but never heats. What does that mean?

Clicking means the control is trying to send power. Either the bake element has failed or a relay is not passing power. We test the element for continuity first, since it is the simpler check.

Can a cracked or bubbled bake element be replaced?

Yes, it is a common repair on an electric range. We replace the element, check the terminals for scorching, and confirm the oven reaches temperature before we leave.

Why does the oven door not stay closed?

The hinges or the door spring may have worn, or the latch may be out of line. We inspect them, because a door that hangs open also wastes heat and can affect baking.

Book a visit

Book repair for your YWFES5730SB

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 589-6107