Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Model library · Whirlpool Range

YWFC310S0ES

Whirlpool YWFC310S0ES Freestanding Range Repair

Book a Service Call(713) 589-6107

Most common issues on this model

  1. Surface element that clicks, sparks or glows unevenly
  2. Bake element and oven thermostat behavior over a full preheat
  3. Selector knobs that feel loose or do not stop at each setting
  4. Rear backguard controls and indicator light operation

We repair the YWFC310S0ES, an electric freestanding range with controls on the backguard and an oven below the cooktop. Kitchens in many Houston neighborhoods hold this style because it needs no cutout, only a place to stand and a 240-volt outlet. That also makes it a range we can service in place with little disruption.

Sparking or clicking under a burner is one of the first things owners describe, and it usually means a worn receptacle or a burner plug that no longer makes full contact. We shut off power, pull the element, and look at the terminals before deciding whether to replace the element, the receptacle or both. Then we run the oven through a full preheat to watch for slow rise or uneven glow.

The number may be followed by endings such as YWFC310S0ES0, YWFC310S0ES4 or YWFC310S0EW2. We read your complete model and serial label before we order a part. Prices are written before work begins, and each repair carries a 30-day workmanship warranty.

Key features

  • Electric range
  • Freestanding design
  • Also found as YWFC310S0ES0, YWFC310S0ES4 and YWFC310S0EW2
→Codes

Error codes this model can show

Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot
YWFC310S0ESYWFC310S0ES questions
Why does my burner spark when I turn it on?

Sparking usually means a poor connection between the element and its receptacle, often with burned contacts. Turn the burner off and call us. We inspect the terminal and replace the receptacle if the metal is pitted.

What does the ES ending on YWFC310S0ES stand for?

The last letters and digit mark a finish or production revision. We use the full label to match the correct element, switch and wiring rather than relying on the base number alone.

The indicator light stays on after cooking. Is that a repair?

An indicator that never turns off may be a stuck switch or a bad light assembly. We check whether any element is still receiving power before we call it a cosmetic issue.

Book a visit

Book repair for your YWFC310S0ES

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 589-6107