Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Range

Whirlpool Range Message “Feature Not Available”: Power Reset Steps

Some Whirlpool freestanding and slide-in ranges, gas or electric, such as the WFE515S0ES or WFG525S0HV, scroll a Feature Not Available message across the display while you are programming a cook cycle. The range is telling you…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
Feature Not Available or Fault Detected
Appliance
Range
Brand
Whirlpool
Warranty
30-day workmanship

What Feature Not Available or Fault Detected means

Some Whirlpool freestanding and slide-in ranges, gas or electric, such as the WFE515S0ES or WFG525S0HV, scroll a Feature Not Available message across the display while you are programming a cook cycle. The range is telling you it found a problem partway through your entry. The display also prompts you either to press Enter to try again or to disable power to clear it. The message itself does not name a part, so the cause is found by testing.

Common causes of Feature Not Available or Fault Detected

  • One-time entry or control glitch while programming
  • Control board response to the programmed cycle
  • Wiring or sensor input read wrongly during the cycle setup
✓ One safe check you can try

1. Press Enter when the display offers to try again. 2. If the message stays, switch the range's circuit breaker off for one minute. 3. Switch the breaker back on. 4. Start a bake cycle. 5. Watch the oven for one minute to make sure the message does not return. 6. Confirm the oven works normally.

! Why to stop there
  • The message does not say which function detected the problem, so a reset cannot identify it
  • If it comes back on the same cycle type, we note which cycle triggers it and test that circuit with a written price first
  • Any gas smell means leaving the house and calling the gas utility from outside
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode PowerLossWhirlpool Range and Wall Oven PowerLoss: Reset the Time Press Cancel to ResetWhirlpool Range Message "Press Cancel to Reset": What to Do Probe or Insert ProbeWhirlpool Range Probe Message: Meat Probe Not Detected FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit
Feature Not Available or Fault DetectedFeature Not Available or Fault Detected questions
What should I press when the message scrolls?

Press Enter to try again, as the display suggests. If it keeps scrolling, disable power at the breaker for one minute and restore it. Both steps are the published guidance and neither requires tools.

Does it mean the oven is dangerous?

The message means a problem was detected during programming, not that the oven is unsafe by itself. Still, if it repeats, stop using that cycle and call us. Gas smell means leave and call the utility.

Do you repair older ranges that show this?

Yes. Many Houston homes still have older Whirlpool ranges, and we work on them. We give a written price before starting, a 30-day workmanship warranty afterward, and say honestly if a repair is not worth it.

Book a visit

Still seeing Feature Not Available or Fault Detected?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107