Error code · Range

Connected Range Notice FC E3 on Whirlpool Models: Link Timed Out

Low risk · DIY check OK

Code: FC E3
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What FC E3 means

FC E3 appears on Whirlpool ranges, freestanding or slide-in, for example the WFG525S0HV or WFE515S0ES, when the connected-feature link fails. The guidance words it the same way as its neighbor: the appliance could not connect to the router, perhaps from a time-out, a weak signal, a failed router, the Wi-Fi module in the range, or the wiring. It offers a one-minute breaker reset. Nothing there tells E3 from E2, so we read the pair as the same family of Wi-Fi link messages.

Common causes of FC E3

Connection attempt timing out
Router not responding or switched off
Wi-Fi module in the range
Wiring to the module

✓ One safe check you can try

1. Make sure your router is on and other devices are online. 2. Switch the range off at its breaker for one minute, then on. 3. Monitor the appliance for a minute for the code. 4. Check normal operation of the oven. 5. Try pairing the range with your network again.

! Why to stop there

The display cannot say whether the router or the range's Wi-Fi module is the weak side
If FC E3 stays, we test the module and its wiring in the range
Cooking is not affected, and you receive the price in writing first

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot Lo or PreWhirlpool Range Lo or Pre: Low Temperature and Preheating

FC E3FC E3 questions

Is FC E3 an oven problem?

Not directly. It is a network message, and the oven should still bake. What you lose is the remote start and monitoring through the app.

The code returns after every reset. Why?

If the router, the signal and the range's module cannot agree, the link fails again. We test the range side and tell you if the problem seems to sit in your network.

Why do FC E2 and FC E3 read alike?

The guidance gives them the same causes and the same reset. We do not guess at the difference. So we test, not guess. Any difference is read on your range.

Book a visit

Still unsure about FC E3?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107