Error code · Range

What to Check When Whirlpool Ovens Show F8: Meat Probe and Reset

Low risk · DIY check OK

Code: F8
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What F8 means

F8 is reported on Whirlpool ranges, such as the WFE515S0ES and WFG525S0HV, and on built-in wall ovens, such as the WOS51EC0HS and WOD51EC0HS. On a range, the guidance first asks you to verify the meat probe is securely inserted in its receptacle, noting the location varies, and then to reset power. On wall ovens, the page only gives the reset and tells you to start a cycle. So the first thing to check is the probe jack, which is often the whole story.

Common causes of F8

Meat probe not seated in its receptacle
Probe or its jack worn, bent or dirty
Control reading the probe input wrongly
Unexplained code on a wall oven that only needs the reset

✓ One safe check you can try

1. Remove the meat probe and plug it back in firmly; check the owner's manual for where the receptacle is on your oven. 2. Turn off the breaker for one minute, then on. 3. Stay for a minute and check for the code. 4. On a wall oven, start a cycle after the reset. 5. Verify normal operation.

! Why to stop there

If the probe is seated and F8 still returns, the jack or the control input needs testing
We check the probe and its connector for wear, which is hard to judge by eye
A written price comes first, with a 30-day workmanship warranty on the work

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot

F8F8 questions

I do not use a meat probe. Why F8?

The code can appear when the probe sits in the oven unseated, or when its jack misreports. Remove the probe, check the receptacle and try the reset.

Can I just stop using the probe?

Often yes, once the code clears. If F8 keeps appearing without a probe, the jack or the control input is worth testing. Replacing the probe may help.

Is the wall-oven F8 the same?

The wall-oven text gives only the reset and a cycle start. We confirm the actual cause on site if it returns. Tell us when you call.

Book a visit

Still unsure about F8?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107