Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Range

Whirlpool Range Code F3: Oven Control Circuit Message

F3 can show up on a Whirlpool range, gas or electric, freestanding or slide-in, such as the WFE525S0HS or WFG515S0ES. The guidance gives a power reset and two suspects: the oven control and the wiring attached…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F3
Appliance
Range
Brand
Whirlpool
Warranty
30-day workmanship

What F3 means

F3 can show up on a Whirlpool range, gas or electric, freestanding or slide-in, such as the WFE525S0HS or WFG515S0ES. The guidance gives a power reset and two suspects: the oven control and the wiring attached to it. No part is named beyond that, so we read F3 as the control reporting that something in its own circuit looks wrong. The oven may stop heating, refuse to start a bake, or simply show the code while the cooktop carries on as normal.

Common causes of F3

  • Oven control reporting an internal or input problem
  • Wiring or connector feeding the control
  • Heating circuit responding differently from what the control expects
✓ One safe check you can try

1. Confirm the oven is off and the door is shut all the way. 2. Flip the range's breaker to off and wait a minute. 3. Flip it back on. 4. Glance at the display after a minute; if F3 has not returned, the reset did its job. 5. Bake something short to see that the oven operates.

! Why to stop there
  • A reset cannot say whether the control itself or a connection to it is responsible
  • If F3 shows up again we test the control inputs and the wiring before naming a part
  • You get the price in writing first, and the work carries our 30-day workmanship warranty
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot Lo or PreWhirlpool Range Lo or Pre: Low Temperature and Preheating
F3F3 questions
Is F3 a sensor code or a control code?

The only guidance for F3 points at the oven control and its wiring, and names no sensor. Other F3 codes with extra digits do mention sensors, so the full text on your display matters.

Can I still use the burners?

The code concerns the oven, but if anything about the range seems off, turn the breaker off. Never open panels yourself, and for any gas smell leave the house and call the utility from outside.

What if the oven works fine after the reset?

Then it may have been a one-time glitch. If F3 returns, it is no longer a glitch, and we test the control circuit on site.

Book a visit

Still seeing F3?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107