Error code · Range

Whirlpool Oven Code F1: Sensor and Control Circuit

Medium · inspection needed

Code: F1
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What F1 means

An F1 on the display of a Whirlpool freestanding or slide-in range (the WFE515S0ES and WFG515S0ES for instance) or of a built-in wall oven such as the WOD51EC0HS tells you the oven wants attention. The published step is a breaker reset. It names the oven temperature sensor, the control and the wiring. On some older Whirlpool ovens F1 is followed by a dash and another character, and those longer codes have their own pages here.

Common causes of F1

Oven temperature sensor
Wiring from the sensor to the control
Control reading the sensor

✓ One safe check you can try

1. Switch off the oven and let it cool. 2. Switch off the circuit breaker that feeds the oven and keep it off for a minute. 3. Turn the breaker on. 4. Monitor the oven for one minute to see if F1 shows again. 5. Verify normal operation with a short bake.

! Why to stop there

A plain F1 that returns means the cause is still present and the display cannot tell us which of the three areas it is
We test the sensor, check the wiring and then the control, in that order
The price is written down for you before we start

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot

F1F1 questions

What is the difference between F1 and F1-1?

Older ovens show the dash and another character after F1 and the guidance treats them as separate codes. A plain F1 is the shorter message on the platforms listed here.

Do I have to replace the sensor?

Not necessarily. The sensor is only one of three areas named. We test first, and a loose connection can look just like a bad sensor.

Is it worth fixing an old oven with F1?

Often yes, since sensor circuits are routine work. We tell you before we start if the age and condition of the oven make repair a poor choice.

Book a visit

Still seeing F1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107