Error code · Range

Seeing F1-3 on an Older Whirlpool Range: Sensor Reading Alert

Medium · inspection needed

Code: F1-3
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What F1-3 means

Older generation Whirlpool freestanding and slide-in ranges, such as members of the WFE525S0HS line, print F1-3 on the display. The published remedy is to turn power off and on for a minute. The oven temperature sensor, the control and the connecting wiring are listed as the areas that may need attention. These are ovens many Houston homes still use, and we repair them. The code stays shown, and the oven may bake poorly or not at all.

Common causes of F1-3

Sensor reading inside the oven
Loose wiring on the sensor or control
Control interpreting the reading

✓ One safe check you can try

1. Make sure the oven is off and cooled. 2. Cut power at the range's breaker for one minute. 3. Restore power. 4. Check the display for one minute for F1-3. 5. Try a short bake to confirm normal operation.

! Why to stop there

F1-3 returning means the reset did not remove the cause
A technician has to test the sensor circuit, which cannot be done safely from the front of the range
We explain the result and the price before any repair, and the work is covered by our workmanship warranty

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot

F1-3F1-3 questions

Do F1-1, F1-2 and F1-3 mean the same thing?

The guidance names the same areas and the same reset for all three, so we cannot say how they differ. We read the oven on site.

Will the oven be unsafe to use?

The code is a control warning, not a gas warning. But an oven that misreads its temperature may overheat or underheat, so we suggest not using it until checked.

Where do you work on these older models?

We serve Houston and its surrounding areas. Call or book and we schedule a visit, then give you a written price after the diagnosis, before any repair work begins.

Book a visit

Still seeing F1-3?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107