Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Range

F02 on Whirlpool Ranges and Wall Ovens: Temperature Sensor Circuit

Whirlpool freestanding and slide-in ranges such as the WFE525S0HS and WFG515S0ES, as well as built-in wall ovens like the WOS72EC7HS and WOD51EC0HS, can display F02. The published remedy is a one-minute power reset. The areas it…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F02
Appliance
Range
Brand
Whirlpool
Warranty
30-day workmanship

What F02 means

Whirlpool freestanding and slide-in ranges such as the WFE525S0HS and WFG515S0ES, as well as built-in wall ovens like the WOS72EC7HS and WOD51EC0HS, can display F02. The published remedy is a one-minute power reset. The areas it mentions are the oven temperature sensor, the control, and the wiring. This code is closely related to F01 in what it names. It means the oven's temperature-sensing circuit needs a closer look, and the oven may not heat normally.

Common causes of F02

  • Sensor probe inside the oven cavity
  • Connector between sensor and control
  • Control reading the sensor
✓ One safe check you can try

1. Switch the oven off and allow it to cool. 2. At the breaker panel turn the oven's breaker off for one minute. 3. Switch it on again. 4. Spend a minute watching the display. 5. Verify operation with a short bake.

! Why to stop there
  • The reset does not show whether the sensor, wiring or control is the cause
  • Checking the circuit one part at a time prevents replacing parts that are fine
  • We write the price down before starting any repair
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot
F02F02 questions
How does F02 differ from F01?

The guidance names the same three areas for both and gives no way to tell them apart. We read each oven on site and find out what the circuit is reporting.

Should I try baking anyway?

One short bake after the reset is how you verify the oven. If F02 returns, stop and book a visit, because the oven may not hold the right temperature.

Is there a part I can swap myself?

We advise against opening panels or handling the sensor wiring yourself. Testing it safely takes the right meter, the right access and a technician's experience, and the oven stays off meanwhile.

Book a visit

Still seeing F02?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107