Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Range

Whirlpool Range Showing an H: Hot Surface Reminder

An H in the heat setting window of a Whirlpool freestanding or slide-in range tells you a surface cooking area is still too hot to touch, even after the burner or element has been turned off.…

Low risk · DIY check OK
Book a Service Call(713) 589-6107
Code
Displaying an H
Appliance
Range
Brand
Whirlpool
Warranty
30-day workmanship

What Displaying an H means

An H in the heat setting window of a Whirlpool freestanding or slide-in range tells you a surface cooking area is still too hot to touch, even after the burner or element has been turned off. It is a hot-surface reminder, not an error, and it appears on gas and electric models such as the WFE525S0HS and WFG515S0ES. It goes away on its own once the cooktop cools. If it keeps showing or flashes after the cooktop has cooled, a power reset is the next step.

Common causes of Displaying an H

  • Surface still hot after cooking, which is normal
  • Cooktop sensor reading high after it has cooled
  • Control holding the indicator after the surface has cooled
✓ One safe check you can try

1. Leave the cooktop alone until it has cooled completely. 2. If the H is still showing or flashing, switch the range off at its breaker for one minute. 3. Switch the breaker on again. 4. Verify that the cooktop works. 5. Keep children and pets away from the cooktop while the H is lit.

! Why to stop there
  • An H that never goes out on a cold cooktop points to a sensing or control problem we have to test
  • We check the cooktop sensing and the control before suggesting a part
  • You see the price in writing before any repair
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot
Displaying an HDisplaying an H questions
How long does the H stay on after cooking?

It stays on while any surface cooking area remains too hot to touch. The time depends on what you cooked and how long, so wait for the cooktop to cool fully before judging it.

Does the H mean something is wrong?

Not by itself. It is a safety reminder that the surface is hot. Only when it stays on or flashes long after the cooktop is cool does it call for a power reset.

What if the H comes back after the reset?

Then the range may be misreading cooktop temperature. Stop relying on the indicator, treat the surface as hot, and book a visit so we can test the sensing and control.

Book a visit

Still unsure about Displaying an H?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107