Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Range

Whirlpool Range Display “Demo Mode”: Showroom Setting Switched On

Demo Mode is a showroom setting built into the control of Whirlpool freestanding and slide-in ranges, including the WFE515S0ES and WFG525S0HV. It was made for the sales floor, where a range runs on a 120 V…

Low risk · DIY check OK
Book a Service Call(713) 589-6107
Code
Demo Mode
Appliance
Range
Brand
Whirlpool
Warranty
30-day workmanship

What Demo Mode means

Demo Mode is a showroom setting built into the control of Whirlpool freestanding and slide-in ranges, including the WFE515S0ES and WFG525S0HV. It was made for the sales floor, where a range runs on a 120 V connection and the keypad can be shown off without the oven turning on. If it gets activated in a home, the oven will not heat at all, even though the display and keys respond. The way out is described in the owner's manual for your model.

Common causes of Demo Mode

  • Demo setting accidentally entered from the settings or clock keys
  • Keypad or user interface sending a stuck key signal
  • Wiring to the keypad
  • Control that needs a power restart
✓ One safe check you can try

1. Read the owner's manual for your model and follow its steps to leave demonstration mode. 2. If you no longer have the manual, look it up by the model number on the range's rating label. 3. If needed, turn the range's breaker off for one minute and back on. 4. Watch the oven for one minute and confirm the display does not return to the demo setting. 5. Try a normal bake.

! Why to stop there
  • If the oven still will not heat after leaving demo mode, the keypad or wiring may be involved and needs testing
  • A stuck key can put the control back into the setting again and again, which we check on site
  • We say what we find and quote the price first
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot Lo or PreWhirlpool Range Lo or Pre: Low Temperature and Preheating LOCLOC on a Whirlpool Range or Wall Oven: Control Lock Is On
Demo ModeDemo Mode questions
Why will my oven not heat when the display looks normal?

In Demo Mode the control lets you use its features without turning the oven on. The display and keys work, but the heating is switched off on purpose.

Is Demo Mode a broken part?

No, it is a setting, not damage. It can be set by accident from the keypad. If it keeps returning, the keypad or wiring may be sending false presses.

Do I need a technician to turn it off?

Often not. Your owner's manual has the exact keys for your model. If those steps do not work or the mode comes back, we can check the keypad and control.

Book a visit

Still unsure about Demo Mode?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107