Error code · Range

9d62 Code on a Whirlpool Range: Latch and Door Switch Message

Medium · inspection needed

Code: 9d62
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What 9d62 means

With 9d62 on the display, a Whirlpool freestanding or slide-in range (gas or electric, for instance the WFE515S0ES or WFG525S0HV) is flagging a door-related condition. Official guidance goes no further than a power reset, naming the oven door latch assembly, the door switch and the wiring as places a problem may sit. That puts the focus on the door-lock side of the oven rather than on heat or the burners. Expect the code to persist until power is cycled, and the oven may be unavailable.

Common causes of 9d62

Latch assembly travel or position feedback
Door switch
Wires and connectors of the door circuit
Oven control

✓ One safe check you can try

1. Check the door seats squarely and is free of obstruction. 2. Turn off the breaker for the range, wait a minute. 3. Turn on the breaker. 4. Monitor the oven display for one minute for 9d62. 5. Verify operation with a short bake.

! Why to stop there

Without testing we cannot say if the door parts are worn or only reporting a one-time error
We look at the latch movement, the switch and the wiring path before we recommend any part
Nothing is replaced until you approve the price we have written for you

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot Lo or PreWhirlpool Range Lo or Pre: Low Temperature and Preheating LOCLOC on a Whirlpool Range or Wall Oven: Control Lock Is On LockWhirlpool Range Cooktop Lock: Unlocking the Surface Controls

9d629d62 questions

Is 9d62 one of those codes that fixes itself?

Sometimes a power reset clears it for good. But if it comes back, it will not fix itself, and a technician needs to test the whole door latch circuit to find the cause.

Will my oven door lock during cleaning if I leave this?

We cannot promise how the lock will behave while the code is active. Avoid starting a cleaning cycle until the circuit has been checked, since that cycle depends on the door lock.

What do you charge for the diagnosis?

We give the price in writing before we start, so you know the cost first. Once you approve it, our labor is guaranteed for 30 days after the repair.

Book a visit

Still seeing 9d62?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107