Error code · Range

What 9d41 Means on a Whirlpool Range: Door Switch Reading Error

Medium · inspection needed

Code: 9d41
Appliance: Range
Brand: Whirlpool
Warranty: 30-day workmanship

What 9d41 means

9d41 is one of a series of 9d messages that appear on Whirlpool freestanding and slide-in ranges, among them the WFE515S0ES electric and WFG515S0ES gas models. Nothing in the published material explains the digits. It offers a power reset and mentions the oven door latch assembly, the door switch and the associated wiring. For you that means a code on the display and an oven that may not carry out its cycles properly until the door circuit is sorted out.

Common causes of 9d41

Door switch reading
Latch assembly position
Wiring continuity in the door circuit
Control board

✓ One safe check you can try

1. Check that nothing is stuck in or against the closed oven door. 2. Shut the range off at the breaker and give it one minute. 3. Turn the breaker on. 4. Watch the display for one minute to see if 9d41 comes back. 5. Confirm the oven runs normally.

! Why to stop there

We cannot say whether the switch, the latch or a connector is the cause until we test the circuit
Where the cause is a worn part we explain the price first, and a 30-day warranty covers our workmanship
If the reset holds, tell us if it returns so we can catch a weak connection early

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot

9d419d41 questions

Does 9d41 mean the oven door is broken?

Not necessarily. It means the door circuit is not reporting as the control expects. The cause could be the latch, the switch or a wire, and we find out by testing.

What if my range is an older model?

Older ranges are still common and we repair them. We check how the door parts have aged and tell you if a repair no longer pays off.

Why wait a minute after switching the breaker back on?

The guidance asks you to monitor the oven for one minute to see whether the code returns. A code that stays gone suggests a one-off glitch; one that returns needs testing.

Book a visit

Still seeing 9d41?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107