Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Range

Whirlpool Range Code 1D22 Review: Sensor Circuit

1D22 appears on Whirlpool freestanding and slide-in ranges, electric or gas, such as the WFG515S0ES, when the control questions the oven temperature sensor circuit. The sensor, the control itself and the wiring that links them are…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
1d22
Appliance
Range
Brand
Whirlpool
Warranty
30-day workmanship

What 1d22 means

1D22 appears on Whirlpool freestanding and slide-in ranges, electric or gas, such as the WFG515S0ES, when the control questions the oven temperature sensor circuit. The sensor, the control itself and the wiring that links them are all in the frame. The effect you see is an oven that may heat unevenly or stop a cycle, and a 1D22 that stays on the screen until the power is reset.

Common causes of 1d22

  • The oven temperature sensor
  • The control board
  • Wiring connectors in the sensor circuit
✓ One safe check you can try

1. Turn the breaker for the range off and leave it for a full minute. 2. Restore power. 3. Give it a minute, then check the screen. 4. Start a short bake and note whether the oven warms up as usual. 5. If 1D22 returns, we suggest you stop baking and book a visit.

! Why to stop there
  • A reset clears the display but does not explain why the control complained.
  • We test the sensor circuit as a whole, from the probe to the plug at the control.
  • The repair is quoted in writing first, and a 30-day workmanship warranty applies.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

PUSH or PSHWhirlpool Range PUSH or PSH: Start Was Not Pressed Sabbath ModeWhirlpool Range Sabbath Mode: Why the Oven Stays On Sabbath, Sab, 5Ab, or 5A7Whirlpool Range Sabbath, Sab, 5Ab or 5A7: Canceling the Mode FEE6Whirlpool Range Code FEE6: Bake Element Circuit FEE7Whirlpool Range Code FEE7: Checking the Broil Element Circuit FEE8Whirlpool Range Code FEE8: Oven Reset, No Part Named Indicator FlashingWhirlpool Range Indicator Flashing: Stuck Key or Control Setting Indicator or Hot Light OnWhirlpool Range Hot Light On: Control Still On or Surface Hot
1d221d22 questions
Does 1D22 mean the oven is overheating?

The code does not say that. It says the reading from the sensor circuit is in doubt. We check the circuit before drawing any conclusion about actual temperature.

Why does a loose plug matter?

The sensor signal is small, so a poor contact changes the reading. A plug that has loosened can look like a bad sensor, and we test for that first.

Is it worth repairing an older range for 1D22?

Frequently, since a sensor repair is modest compared with a new range. We say plainly if the cost does not make sense. You will hear that before we order anything.

Book a visit

Still seeing 1d22?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107