Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Microwave

Whirlpool Built-in Microwave Code F6 E1: Oven Temperature Sensing Circuit

Whirlpool built-in microwaves and microwave drawers such as WMC50522AS can display F6 E1. It tells us the control has run into trouble in the main oven temperature sensing circuit, which can involve the temperature sensor itself,…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
F6 E1
Appliance
Microwave
Brand
Whirlpool
Warranty
30-day workmanship

What F6 E1 means

Whirlpool built-in microwaves and microwave drawers such as WMC50522AS can display F6 E1. It tells us the control has run into trouble in the main oven temperature sensing circuit, which can involve the temperature sensor itself, the appliance manager that reads it, or the wiring between them. On the display you see the code and the unit stops cooking as normal. The code names an area to test, so it does not prove that any one part has gone bad.

Common causes of F6 E1

  • Main oven temperature sensor reading
  • Appliance manager board that interprets the sensor
  • Wiring and connectors in the sensor circuit
✓ One safe check you can try

1. At the panel, shut off the breaker that serves the microwave and keep it off for a full sixty seconds. 2. Restore the power. 3. Stand by the unit for a minute and see if F6 E1 shows up once more. 4. When the display stays clean, run a normal cook cycle to confirm everything works.

! Why to stop there
  • If F6 E1 returns after the power reset, the sensing circuit needs hands-on testing, because the display cannot tell a sensor from a board.
  • We test the sensor circuit first, then the manager board, and tell you which one is responsible before any work begins.
  • You get a written price up front, and the repair we finish is backed by our 30-day workmanship warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Microwave codes

FC E8Whirlpool OTR Microwave Registration Code FC E8: Entry Mistake FCE8Whirlpool Over-the-range Microwave Registration, FCE8: Wrong Model Selected Feature Not Available or Fault DetectedWhirlpool Built-in Microwave Message "Feature Not Available": Retry or Cut Power LOCWhirlpool Microwave LOC on the Display: Control Lock Is On PFWhirlpool Over-the-range Microwave Showing PF: Power Failure Indicator Press Cancel to ResetWhirlpool Built-in Microwave Message "Press Cancel to Reset": Error Cleared by Cancel F8 E4Whirlpool Microwave Drawer Error Code F8 E4: Exhaust Air Temperature Sensor Probe or Insert ProbeWhirlpool Built-in Microwave Asking for "Insert Probe": Seat the Meat Probe
F6 E1F6 E1 questions
Does F6 E1 mean my microwave is ruined?

Not by itself. The code points to the temperature sensing circuit, which has several parts. A one-time glitch can clear with a breaker reset, while a repeat means we need to test the sensor, the manager board and the wiring.

Can I keep cooking while F6 E1 is on the display?

The unit usually stops cooking when it appears. If a reset clears it, you may carry on and watch for a repeat. If it keeps coming back, stop using the unit until we have looked at it.

Will you tell me the price before starting?

Yes. We diagnose first, write down the price for the exact repair, and begin only after you say yes. Our 30-day workmanship warranty covers the completed work.

Book a visit

Still seeing F6 E1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107