Error code · Microwave

Whirlpool Built-In Microwave Fixes for F1 E2: Microwave User Interface

Medium · inspection needed

Code: F1 E2
Appliance: Microwave
Brand: Whirlpool
Warranty: 30-day workmanship

What F1 E2 means

F1 E2 on a Whirlpool built-in microwave or microwave drawer, such as model WMC50522AS, tells you the control found a problem that may involve the microwave user interface or the associated wiring. The wording differs from F1 E0 because it names the microwave's own interface, not a touchpad and control together. The display shows F1 E2 and the microwave may not respond to the keys or may not start a cycle.

Common causes of F1 E2

Microwave user interface
Wiring between the interface and the control

✓ One safe check you can try

1. Turn off the microwave's breaker and leave it off for one minute. 2. Turn it back on. 3. Monitor the oven for a minute to check that F1 E2 does not come back. 4. Press a few keys and run a short cycle to verify operation. 5. If the code returns, stop using the keys.

! Why to stop there

A reset does not show whether the interface or its wiring is the cause, so we test the connection first.
We look at whether the display and keys respond together, which tells us about the interface.
The finding and a written price come before any repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave codes

F8 E4Whirlpool Microwave Drawer Error Code F8 E4: Exhaust Air Temperature Sensor Probe or Insert ProbeWhirlpool Built-in Microwave Asking for "Insert Probe": Seat the Meat Probe F8E5Whirlpool Microwave Code F8E5: Exhaust Air Temperature Sensor PUSH or PSHWhirlpool Built-in Microwave Shows PUSH or PSH: Press Start F9Whirlpool OTR Microwave Error F9: Control and Relay Boards Registration ErrorWhirlpool Over-the-range Microwave "Registration Error": Network Checks F9 or F9E0Whirlpool Built-in Microwave Codes F9 and F9E0: Home Power Supply Sabbath, Sab, 5Ab, or 5A6Whirlpool Built-in Microwave Showing Sab or 5Ab: Sabbath Mode

F1 E2F1 E2 questions

What is the microwave user interface?

It is the keypad and display section that you use to set cooking. F1 E2 says this part or its wiring may have a problem.

Does F1 E2 mean the heating has failed?

The code concerns the interface, not heating. The oven may still be able to heat once the interface works again, and we test both so you know what is working.

What if a reset clears it?

Use the oven and watch for a repeat. If F1 E2 returns, call us and we will test the interface and wiring, then explain the price before we start.

Book a visit

Still seeing F1 E2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107