Error code · Microwave

Whirlpool Over-the-Range Microwave Code E61, What We Check: Open Oven Sensor Circuit

Medium · inspection needed

Code: E61
Appliance: Microwave
Brand: Whirlpool
Warranty: 30-day workmanship

What E61 means

On Whirlpool over-the-range microwaves, such as model WMH31017HS, WMH32519HZ or WMH53521HZ, E61 means the oven sensor circuit reported an open condition to the control board. The control cannot complete the loop that reads the sensor, as if a wire had come loose. The sensor, the appliance control board or the wiring may be responsible. You will see E61 in the display and the oven may not start a cycle or may end one early.

Common causes of E61

Oven sensor
Open wiring or loose connector
Appliance control board

✓ One safe check you can try

1. Switch off the circuit breaker for the microwave and leave it off for one minute. 2. Switch it on again. 3. Keep an eye on the microwave for one minute to confirm E61 does not return. 4. Heat a cup of water briefly to confirm the oven still works. 5. If the code comes back, stop using the oven.

! Why to stop there

A loose connector and a failed sensor give the same reading, so we test the circuit to separate them.
If E61 is intermittent, it usually points to a connection that moves.
You get the finding and a written price before we begin.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave codes

FC E1Whirlpool Over-the-range Microwave Wi-Fi Code FC E1: Weak Signal FC E2FC E2 on a Whirlpool OTR Microwave: Router Connection Lost FC E3Whirlpool Over-the-range Microwave Showing FC E3 for Wi-Fi: Module Check FC E7Whirlpool OTR Microwave Connection Code FC E7: Appliance Not Reaching the Internet FC E8Whirlpool OTR Microwave Registration Code FC E8: Entry Mistake FCE8Whirlpool Over-the-range Microwave Registration, FCE8: Wrong Model Selected Feature Not Available or Fault DetectedWhirlpool Built-in Microwave Message "Feature Not Available": Retry or Cut Power LOCWhirlpool Microwave LOC on the Display: Control Lock Is On

E61E61 questions

What is the oven sensor on this microwave?

It is a sensor the control reads to manage heating. E61 says the circuit to that sensor looks open, as if a connection were broken, so the control cannot read it.

How do E61 and E62 differ?

E61 is an open sensor circuit and E62 is a shorted one, so the two codes cover opposite conditions in the same area. The two codes cover opposite conditions in the same area.

Will a reset fix it?

Maybe, for a one-time glitch. If E61 comes back, something in the circuit needs repair and we will test it first and give you a written price.

Book a visit

Still seeing E61?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107