Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Dryer

Whirlpool Dryer Do Code: Door Open When Starting

The code do, in lowercase, appears on Whirlpool electric and gas dryers in the WED and WGD series, Cabrio and Duet generations included, such as the WED5000DW. It typically shows when someone tries to run the…

Low risk · DIY check OK
Book a Service Call(713) 589-6107
Code
do
Appliance
Dryer
Brand
Whirlpool
Warranty
30-day workmanship

What do means

The code do, in lowercase, appears on Whirlpool electric and gas dryers in the WED and WGD series, Cabrio and Duet generations included, such as the WED5000DW. It typically shows when someone tries to run the dryer with the door open or ajar. The usual fix is to verify the door is completely closed and latched. If do still appears after that, the door switch or latch probably needs a service call.

Common causes of do

  • Door not closed completely
  • Clothing or a lint screen edge keeping the door from latching
  • Door latch or strike worn
  • Door switch not registering a closed door
✓ One safe check you can try

1. Open the door and remove anything caught at its edge. 2. Close the door firmly until it is completely closed and latched. 3. Press Start again. 4. If do remains, call us, because it will probably require a service call.

! Why to stop there
  • A door that looks shut may not be latching, and the cause is inside the door area
  • Worn latches can work on some days and fail on others
  • We check the latch and switch, and quote the repair in writing first
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dryer codes

LocWhirlpool Dryer Code Loc: Control Lock Turned On by Mistake PFWhirlpool Dryer PF Code: Power Failure During a Cycle tSWhirlpool Dryer Code tS: Thermistor Reading Out of Range Water TankWhirlpool Dryer Message Water Tank: Tank Full or Not Seated F6E5Whirlpool Laundry Tower Dryer Code F6E5: Control Link Lost F7E1Whirlpool Dryer Code F7E1: Motor System, Control or Wiring F7E2Whirlpool Tower Dryer F7E2 Code: Fan Circuit on Ventless, Control Unit on Stacked F7E3Whirlpool Ventless Tower Dryer Code F7E3: Compressor Circuit in the Cooling System
dodo questions
What does the do code on a dryer mean?

It means the dryer was started with the door open or not fully closed. Close it completely so it latches, then start the cycle again.

Why does do show up with the door closed?

The door may be closed but not latched, or the door switch may not be registering. If the door is firmly latched and do stays, the switch or latch needs service.

Is do a safety lockout?

In effect, yes. The dryer will not run unless it senses a closed door. That is intended, so please do not try to bypass it, and call us if it will not clear.

Book a visit

Still unsure about do?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107