Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Dryer

Whirlpool Dryer 0g Error: Power-Down Reset, Then Testing

The code 0g, with a lowercase g, shows on Whirlpool electric and gas dryers of the WED and WGD families, which include Cabrio and Duet generations and models like the WGD5000DW. The brand gives only a…

Medium · inspection needed
Book a Service Call(713) 589-6107
Code
0g
Appliance
Dryer
Brand
Whirlpool
Warranty
30-day workmanship

What 0g means

The code 0g, with a lowercase g, shows on Whirlpool electric and gas dryers of the WED and WGD families, which include Cabrio and Duet generations and models like the WGD5000DW. The brand gives only a reset routine for it and names no sensor, relay, or cause. You will see 0g on the display and the dryer may refuse to start or stop partway. Without a published cause, the honest answer is that we have to test the dryer to find it.

Common causes of 0g

  • Control board and its harness connections
  • A one-time electronic glitch cleared by cutting power
  • Sensor or input circuit feeding the control
  • Wiring where the control receives power
✓ One safe check you can try

1. Switch off the dryer's circuit breaker or breakers and leave them off for 5 minutes. 2. Switch them back on. 3. Run a timed dry cycle. 4. Stay nearby for a minute to see if 0g appears again. 5. If it does, do not keep restarting the dryer, and call us.

! Why to stop there
  • Cutting power clears a glitch but cannot explain what caused it
  • The code does not say whether the issue is on the board or in the wiring
  • We trace it step by step and quote in writing before touching a part
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dryer codes

LocWhirlpool Dryer Code Loc: Control Lock Turned On by Mistake PFWhirlpool Dryer PF Code: Power Failure During a Cycle tSWhirlpool Dryer Code tS: Thermistor Reading Out of Range Water TankWhirlpool Dryer Message Water Tank: Tank Full or Not Seated F7E6Whirlpool Laundry Tower Dryer F7E6 Code: Motor Circuit Check on the Dryer F9E2Whirlpool Dryer Code F9E2: Water Tank Full, or Reset Only FCE1Whirlpool Dryer FCE1 Code: Breaker Reset Only FEWhirlpool Dryer Code FE: Power Source Problem at the Outlet
0g0g questions
Is the lowercase g in 0g important?

Yes. Type it as it displays, 0g. The display reads exactly that, and when you call, it helps us to know the exact characters and the dryer model.

Does 0g mean the dryer is overheating?

Nothing published says so. The guidance for 0g names no heat or sensor cause, only a reset. We would test the dryer to find out, rather than assume a cause.

What does a visit for 0g include?

We test the control, its power feed, and the wiring, then explain what we found. The written price comes first, and repairs carry a 30-day workmanship warranty.

Book a visit

Still seeing 0g?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107