Error code · Cooktop

Whirlpool Induction Cooktop Code F7E6 and the Power Cycle It Asks for

Medium · inspection needed

Code: F7E6
Appliance: Cooktop
Brand: Whirlpool
Warranty: 30-day workmanship

What F7E6 means

F7E6 appears on the display of a Whirlpool induction cooktop when the control stops normal operation. As with F7E5, the instructions name no part and give only a reset: disconnect the cooktop from power, wait a few seconds, and reconnect it. Cooking zones may be disabled until that is done. A code that returns means a technician should test it.

Common causes of F7E6

A passing electronic error that a power cycle clears
The cooktop's control electronics
Connections beneath the glass if the code repeats

✓ One safe check you can try

1. Switch all cooking zones off. 2. Turn off the breaker feeding the cooktop. 3. After a few seconds, switch it back on. 4. See whether F7E6 appears again. 5. If it does, stop using the cooktop and call us with the code.

! Why to stop there

No cause is named, so we cannot tell from the number alone what needs replacing.
We check the control electronics, the zone connections and the supply.
You approve a written price first, with a 30-day workmanship warranty on the work.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

HWhirlpool Induction Cooktop H: Hot Cooking Zone Indicator Lights Not Turning OnWhirlpool Smoothtop Cooktop Indicator Lights Not Turning On: No Power or Dead Controls Indicator or Display FlashingWhirlpool Cooktop Indicator or Display Flashing: Pressed Keys or an Unsuitable Pan Indicator or Hot Light OnWhirlpool Smoothtop Cooktop Hot Light On: Control Still on or Glass Still Hot LockWhirlpool Smoothtop Cooktop Lock: Control Lock Is on Performance Boost FlashingWhirlpool Induction Cooktop Performance Boost Flashing: Zone Limited Power Level Lower Than Level RequestedWhirlpool Induction Cooktop Power Level Lower Than Requested, a Power Limit at Work U-uWhirlpool Induction Cooktop U-u: No Suitable Pan Detected

F7E6F7E6 questions

What is F7E6 on a Whirlpool induction cooktop?

It is a control error with no named part. The only instruction is to cut power for a few seconds and restore it, then see whether the code returns.

How long should I leave the power off for F7E6?

The instruction says a few seconds, which is enough for the reset. A longer wait does no harm, but it will not fix a problem that is still there.

Is F7E6 different from F7E5?

They are separate codes with identical guidance. We read the full behavior of the cooktop and test it, since the number alone does not name a part.

Book a visit

Still seeing F7E6?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107