Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Whirlpool specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 589-6107 Book a Service Call
Error code · Cooktop

Whirlpool Smoothtop Cooktop Code F1E0: Keys Read As Pressed

F1E0 on a Whirlpool electric radiant (smoothtop) cooktop, for example the WCE55US6HS, means the control sees one or more keys as permanently pressed. You may also notice lights flashing or tones beeping. Soil, a spill, or…

Low risk · DIY check OK
Book a Service Call(713) 589-6107
Code
F1E0
Appliance
Cooktop
Brand
Whirlpool
Warranty
30-day workmanship

What F1E0 means

F1E0 on a Whirlpool electric radiant (smoothtop) cooktop, for example the WCE55US6HS, means the control sees one or more keys as permanently pressed. You may also notice lights flashing or tones beeping. Soil, a spill, or an object on the touch panel is the most common reason. Start by making sure the controls are off, clearing the panel, and cleaning it well before resetting power.

Common causes of F1E0

  • Spill or residue pressing on the touch keys
  • Object left on the control area
  • Cooktop control or the wiring to it
  • Moisture under the panel edge
✓ One safe check you can try

1. Make sure every cooktop control is off. 2. Remove anything on the control area. 3. Clean the touch panel thoroughly and dry it. 4. Reset power at the breaker for one minute. 5. Check the display again after one minute.

! Why to stop there
  • If F1E0 persists on a clean, dry panel, we test the cooktop control and the wiring to it.
  • We check for liquid that may have run under the glass.
  • We put the price in writing first, and every repair has a 30-day workmanship warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Cooktop codes

Indicator or Hot Light OnWhirlpool Smoothtop Cooktop Hot Light On: Control Still on or Glass Still Hot LockWhirlpool Smoothtop Cooktop Lock: Control Lock Is on Performance Boost FlashingWhirlpool Induction Cooktop Performance Boost Flashing: Zone Limited Power Level Lower Than Level RequestedWhirlpool Induction Cooktop Power Level Lower Than Requested, a Power Limit at Work U-uWhirlpool Induction Cooktop U-u: No Suitable Pan Detected FC E1Whirlpool Cooktop Code FC E1: Touchpad Message FC E4Whirlpool Cooktop Code FC E4: Harness to the Touchpad FC LFWhirlpool Cooktop Code FC LF: Left Front Element Circuit
F1E0F1E0 questions
Why do the lights flash and the cooktop beep?

Those are signs that keys are reading as pressed. The cooktop is reacting to what it believes is constant input, so cleaning the panel is the first step.

Can I clean the panel while the cooktop is on?

Wiping a live panel can press keys by accident and start a burner, which is why the controls should be off first. Dry the glass before turning controls back on.

What if cleaning does not help?

Then the control or its wiring may be sending a false key signal. We test it before replacing any part and tell you what we find.

Book a visit

Still unsure about F1E0?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107