Error code · Cooktop

Whirlpool Induction Cooktop Code F0E2: Disconnect Power and Try Again

Medium · inspection needed

Code: F0E2
Appliance: Cooktop
Brand: Whirlpool
Warranty: 30-day workmanship

What F0E2 means

If F0E2 appears on a Whirlpool induction cooktop like the WCI55US0JS, no particular cause is published. The guidance is to disconnect the cooktop from its power supply, wait a few seconds, and reconnect it. Should the code remain, it asks you to call service and quote F0E2. This code is not the pan message, which belongs to F0E1. Treat F0E2 as an internal alert.

Common causes of F0E2

Temporary control alert after a power disturbance
Internal circuit that keeps flagging F0E2
Connection inside the cooktop that is not holding

✓ One safe check you can try

1. Turn all zones off. 2. Disconnect power to the cooktop at its circuit breaker. 3. Wait several seconds, then reconnect it. 4. Keep an eye on the display for the first minute. 5. If F0E2 remains, write the code down and stop using the cooktop.

! Why to stop there

Since F0E2 does not name a part, we test the control and its wiring to find the cause.
We make sure it is not a cookware code by trying the cooktop with different pans.
You get a written price first, and our repairs are covered by a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

Indicator or Hot Light OnWhirlpool Smoothtop Cooktop Hot Light On: Control Still on or Glass Still Hot LockWhirlpool Smoothtop Cooktop Lock: Control Lock Is on Performance Boost FlashingWhirlpool Induction Cooktop Performance Boost Flashing: Zone Limited Power Level Lower Than Level RequestedWhirlpool Induction Cooktop Power Level Lower Than Requested, a Power Limit at Work U-uWhirlpool Induction Cooktop U-u: No Suitable Pan Detected FC E1Whirlpool Cooktop Code FC E1: Touchpad Message FC E4Whirlpool Cooktop Code FC E4: Harness to the Touchpad FC LFWhirlpool Cooktop Code FC LF: Left Front Element Circuit

F0E2F0E2 questions

Is F0E2 about my pan?

No. Pan detection is the job of F0E1. F0E2 is a different code, and nothing links it to cookware. Pan detection is the job of F0E1, and nothing links this code to cookware.

How long should the power stay off?

A few seconds is what the guidance calls for. A full minute at the breaker is also fine and gives the electronics time to settle.

What do I tell you when I call?

Tell us the code, the model if you can find it, and whether it appears at start-up or after cooking. That shortens the visit and helps us pack parts.

Book a visit

Still seeing F0E2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 589-6107